EZ Web Lynx 5.0V

Use HTML to add monitoring and control capability from any internet-ready mobile device or PC to your products. The module contains an integrated web server to bridge it's 11 I/O pins to any 10BASE-T Ethernet port. Upload custom web pages and use custom HTML tags to access and control all device I/O. Runs at 5V. Allows a PWM or timer channel.

EZ Web Lynx 5.0V Advantages:

• 11 I/O pins (5 can be analog). Analog inputs have a range from Vdd to GND and a resolution of (Vdd-GND)/256
• 2 I/O pins can communicate with Dallas sensors over an I2C bus to monitor temperature in Fahrenheit or Celsius
• 2 I/O pins can be used to implement a serial communications channel
• One pin can be configured as PWM and one as timer
• 256 8-bit volatile and non-volatile registers are provided for data storage
• Configurable serial capture buffer allows EZ Web Lynx to automatically capture a specific frame of serial data based on user specified start and stop conditions

EZ Web Lynx 5.0V Key Features:

• Integrated web server bridges device I/O to Ethernet
• Serves custom HTML dynamic web pages for displaying data
• Sends email notifications of event driven alarms and/or daily status
• Serial AT command interface allows user to configure and operate the device without a network connection
• UDP server interface included to accept AT commands and works with the EZ Web Lynx IDE to configure the device
• HTTP CGI interface commands can be issued to the EZ Web Lynx using HTTP CGI GET and POST commands
• Permits full modification of its networking settings, allowing easy integration into networks
• Device Lock password protects EZ Web Lynx from changing the configuration of the device
• Pin Lock allows I/O pins to be locked in their current state to prevent mode configurations from being modified

Get started quickly using the 5.0 Volt EZ Web Lynx Development Kit!

Need a low voltage solution? Check out the 3.3V EZ Web Lynx!