CURRENT SOFTWARE VERSIONS
 Version 5.118
 

 
RECENT CHANGES
 5.118  Corrected an access violation that happened with some overloaded functions involving ROM pointers
 5.118  Added __eval() preprocessor function that may be used in #warning to debug macros
 5.118  Updated S/W #use i2c() so that slower baud rates can be used from a fast clock speed on PCM/PCH.
 5.118  Updated Wizard generated TCP/IP code to fix some incompatibility with newer PICs.
 5.118  Fixed some issues with CLC functions for PIC16F18125 family.
 5.118  Fixed some issues with NCO functions for PIC18F18125 family.
 5.118  Fixed some issues with Interrupt on Change (IOC) functions for PIC18F18125 family.
 5.118  Added support for the ENCx24J600 Ethernet module to the Wizards.
 5.118  Fixed an issue with i2c_write() and i2c_write_slave() slave functions for newer PCD compiler devices.
 5.117  IDE COMPILER > CLEAN function now deletes .hex files.  .ccspjt files are NOT deleted
 5.117  Improved RTOS error message added when a task is not defined.
 5.117  Updated Debugger not showing RAM for parts with more than 64K RAM.
 5.117  Fixed the USE RS232 receive_buffer= option when used with over 4K RAM.
 5.117  Fixed spi_read() function to properly wait on newer PIC 18 devices when a parameter is passed to it to clock out.
 5.117  Updated i2c_slaveaddr() function to update all slave address registers for newer PIC18 devices.
 5.117  #pin_select  now accepts PORTF pins on the dsPIC33CK1024MP710 family.
 5.117  All CN pins are now available for PIC24FJ64GB106, PIC24FJ64GB108 and PIC24FJ64GB110 devices.
 5.117  Updated PCD Wizard TCP/IP to fix an issue with displaying web pages on some parts.
 5.116  Added support for the newest chips.
 5.116  Sometimes when using a fixed compiler version in the IDE, it used the wrong device database.  Now fixed.
 5.116  A problem with #rom xxxx=CRC for multiple compilation units is fixed.
 5.116  A divide bug affecting 32,48 and 64 bit integers when two words in the divisor were the same is fixed.
 5.116  The above divide issue might also have affected some conversions from integer to float.
 5.116  The linker was updated to allow for larger programs with lots of units.
 5.116  Fixed issue with crc_calc() functions when data crosses memory bank for PIC18 devices.
 5.116  disable_interrupts() now only disables a specific IOC pin when those constants are used.
 5.116  Fixed issue with pin_select() function with assigning the U3RTS pin for some PIC24EP devices.
 5.116  Added #pin_select CCP1OUT and CCP2OUT keywords for the PIC18F46J50 family.
 5.116  Fixed issue with read_eeprom() function for PIC16F17115 family leaving NVMREGS bit set.
 5.115  Fixed some header file defines for PIC16F180xx family.
 5.115  Fixed the PCD #use rs232() when using the transmit buffer to not lose some characters.
 5.115  Fixed an issue with setup_vref() function for PIC18F67J11 family.
 5.115  Updated #use spi() for PIC18F45K50 family so the alternate HW DO pin can be used with it.
 5.115  Updated how #use spi() sets up the SPI baud rate when using HW SSP peripheral on some PIC16/18 parts.
 5.115  #opt compress now excludes functions with #asm as-is.
 5.114  #use delay() now shows internal clock used when the requested clock cannot be reached on a dsPIC30F.
 5.114  Fixed an issue with setup_comparator() defines for PIC18F46J11 and PIC18F46J50 families.
 5.114  Fixed issue with C1OUT and C2OUT defines for PIC18F67J11 family.
 5.114  A bug with the strspace option for cin streams is fixed.
 5.114  An optimization bug affecting some PIC18 parts is fixed.
 5.113  Fixed an issue with the rcv_buffer_bytes() return value for PCD.
 5.113  Added support for some new chip families.
 5.113  Eliminated an undeserved internal error with a mix of ternary operators and built in functions.
 5.112  A bug with the timer built in functions introduced in 5.111 is fixed.
 5.111  IDE file history right click now allows you to clear all entries
 5.111  A problem with the IDE Wizard starting up on some machines is fixed
 5.111  A type problem with a constant float being divided by a constant integer is fixed.
 5.111  Duplicate #defines in some devices header files has been fixed.
 5.111  Fixed bad SFR names in PIC16F180xx family.
 5.111  Fixed an issue where DSM and CRC peripheral functions in the PIC16F180xx family.
 5.111  Fixed setup_oscillator() and port_x_pullups() writing to unused registers for PIC16F180xx family.
 5.111  Fixed header files for some dsPIC33 devices that caused a compiler error.
 5.111  Fixed an issue with missing BROWNOUT_NOSL for some PIC16 devices.
 5.110  Many new parts added and some part definitions revised
 5.110  Error when using #rom ... = crc16 on some chips is fixed
 5.110  Updated PIC18F67K40 family CCP remappable pins to match the current device's data sheet.
 5.110  Fixed an issue with missing interrupt defines for some of the PIC18FxxQ84 family.
 5.110  Added missing port_b_pullups() function from PIC16F15254 family.
 5.110  Fixed an issue with #use pwm() on PIC18F45K22 family with assigning the timer to use.
 5.109  Duplicate #defines in some devices header files has been fixed.
 5.109  Some device database corrections were made.
 5.109  Some device header file issues with vector interrupt parts is fixed.
 5.109  A problem with #asm on some PC's (error 53) has been fixed.
 5.108  Compiler installer now installs for all users on PC's where the user is not the Admin.
 5.108  Updated #use i2c() so it initializes the TRIS in the #use fast_io() mode. 
 5.108  Fixed issue with #use rs232() when using both INVERT and HIGH_FLOAT for a S/W UART.
 5.108  Updated the PCD #use spi() library to set the SPI pin fuses on chips that have them.
 5.108  Fixed issues with Input Change Notification interrupts for dsPIC33CH and dsPIC33CK devices.
 5.108  Fixed an issue on the on PIC18F5xK42 when using port F for U1TX.
 5.108  A macro expansion problem when passing a preprocessor line to the macro is fixed.
 5.107  Eliminated a #device needed error for some DSPIC33 parts.
 5.106  Fixed an issue with #device WRITE_EEPROM=ASYNC and #device WRITE_EEPROM=NOINIT in PCD.
 5.106  Updated #use rs232() to auto assign UART pins on remappable pin devices when possible.
 5.106  A problem with #device ANSI for some devices is fixed.
 5.106  Incorrect detection if missing #endif's in some programs is fixed.
 5.106  A problem with ** in a parameter list for byte objects is fixed.
 5.106  For some chips dual partition fuses were not in the right place, now fixed.
 5.106  Missing break detection was updated for some special cases.
 5.106  A bug dealing with very large inline functions is fixed.
 5.105  Added some more PIC16FxxQ84 devices and PIC18FxxQ83 family.
 5.105  Added PIC16F15254 and PIC16F15255 devices.
 5.105  Added CAN drivers for PIC18FxxQ84 and PIC18FxxQ83 families.
 5.105  Updated #use delay() for PCD so internal=31000 will run from the Low-Power RC Oscillator (LPRC).
 5.105  Fixed a bug when assigning a right side bit expression when both sides contain the same variable.
 5.104  A problem with "#fuses none" and multiple compilation units is fixed.
 5.104  Fixed an issue with dma_start() function for PIC18F47Q43 family.
 5.104  Fixed an issue with #use touchpad() for PIC24FJ1024GB610 family.
 5.104  Updated the ModBus driver to work with dsPIC33CH and dsPIC33CK devices when using RS485 enable pin.
 5.104  Fixed an issue with the ADC reference defines for the PIC24FJ256GL408 family.
 5.103  A bug in the PCD divide (since 5.102) is fixed.
 5.102  A problem with some complex macros inside other pre-processor directives is fixed.
 5.102  The PCD divide is better optimized.
 5.102  Fixed an issue with DSM peripheral not being available for some devices in PIC16F1825 family.
 5.102  Fixed error with SPI_SS_DISABLED define being missing for some device's header files that should have it.
 5.101  An undeserved internal error message in PCM and PCD is fixed.
 5.101  Fixed erase_program_eeprom() for Enh16 devices to prevent an infinite loop in some cases.
 5.101  Updated I2C bootloader examples to work with PCM compiler devices.
 5.100  Fixed incorrect ADC bits warning being generated for some PCD devices.
 5.100  Added option to setup_spi() function to enable TX and RX only modes for PIC18 devices with a dedicated SPI peripheral.  Also updated the spi_read() and spi_write() functions to work with the TX and RX only modes.
 5.100  Added SPI functions for PIC18 devices with a dedicated SPI peripheral to enable, disable and clear the SPI Status Interrupts.
 5.099  A bug using #device PASS_STRINGS=IN_RAM with multiple string params is fixed
 5.099  The linux compiler problem generating a OCFF file is fixed
 5.099  Some PCH and PCD optimizations were turned off in 5.098, now back on
 5.098  A bug indirectly referencing integer ROM data from a printf is fixed
 5.098  A problem with indirection on the left side of a shift with a variable on the right is fixed for PIC24
 5.098  Compiler updated to support 64 bit Linux host systems
 5.098  Corrected an issue with #pin_select not assigning the U5RX pin correctly for the PIC18F57Q43 family.
 5.098  Added a driver to the compiler for the SSD1306 display driver.
 5.098  Added support for PIC24FJxxxGL/GU4xx, PIC18FxxQ40 and PIC18FxxQ41
 5.097  A bug in the debugger showing some bit fields is fixed
 5.097  An optimization bug affecting redirected printf's to functions that access ROM is fixed
 5.097  An optimization bug affecting the printf %g on PIC16/18 parts is fixed
 5.097  Fixed issue with set_adc_channel() function for the PIC1867J50 family
 5.097  Added the PIC24FJ128GL306 family to compiler
 5.097  Updated slave I2C for K42/K83 chips to prevent a bus hang when there is other bus activity
 5.096  Removed the recent requirement that prototype parameter names match the definition
 5.096  Added a way around the case item has no break warning, see readme.txt
 5.096  Added the dsPIC33CK64MC105 family to compiler
 5.096  Updated ModBus RTU driver to work with PIC18FxxK42 and PIC18FxxK83 families.
 5.096  A bug accessing ROM data in large structures with both byte and word fields is fixed
 5.095  Fixed an issue with the pin_select() function for PIC18FxxQ43 and PIC18FxxK83 families.
 5.095  Fixed an issue with #use pwm() & setup_ccp() function for PIC18FxxQ43 family when assigning timer to use.
 5.095  Added built-in LINBus protocol support to #use rs232().
 5.095  Fixed an issue with reserved fuses for dsPIC33CK devices when not running at 200MHz.
 5.095  Fixed an issue with dac_write() function for the PIC24FJxxxGB6xx family.
 5.095  Added support for read_device_info() and read_config_info() function for the PIC16F184xx family.
 5.095  #id checksum was throwing a syntax error for some users and is now fixed.
 5.095  set_pwmx_duty() when used with certain parameters was not generated the expected code, now fixed.
 5.095  getenv() was not returning information about RS232 ports as it used to, now fixed.
 5.095  A sign extension bug for some arithmetic expressions is now fixed.
 5.095  Some files and registry entries missing in the new 5.094 installer are now restored.
 5.094  Changes made to type conversion (see readme.txt) that mostly affects the #device ANSI mode
 5.094  When comparing unsigned variables to negative literal constants, compiler no longer assumes TRUE
 5.094      or FALSE as an optimization (now integer promotion rules are applied to both operands).
 5.094  When using #device ANSI, hexadecimal and octal literals are now considered unsigned by default.
 5.094  When using #device ANSI, if a binary operator contains both a signed and unsigned type the integer
 5.094       promotion rules will now use the sign of the largest type or unsigned if they are equal size.
 5.094  Without #device ANSI, the compiler still converts both operands to signed if either type is signed.
 5.094  The Linux command-line switch  +EX now outputs errors/warnings in GCC's format.
 5.094  Added the inttypes.h standard C library header.
 5.094  Fixed a couple issues with the can-pic24_dspic33.c CAN driver.
 5.094  Changed the clock PLL setup for dsPIC33CH/dsPIC33CK devices to prevent some clock fails.
 5.094  A PCD problem with accessing a float64 field in an array of structures is fixed.
 5.094  Fixed an issue with #use i2c() on K83 devices not being able to use second I2C peripheral.
 5.094  Fixed an issue with the debugger not starting correctly for PIC24EP and dsPIC33EP devices.
 5.094  Fixed an issue with pin_select() function and assigning CLC input pins for the PIC18FxxQ10 family.
 5.094  Fixed an issue with read_eeprom() and write_eeprom() functions for the Q43 and Q10 families.
 5.094  Fixed an issue with the #use rs232() PLL_WAIT option and pll_locked() function not working for K42 chips.
 5.094  Fixed an issue with #use spi() not using hardware SPI for the K42 family with some option combinations.
 5.093  Fixed an compile time error for some structure initializations when the structure was returned from a function
 5.093  Corrected a problem with extern arrays when one of the array sizes is []
 5.093  A PIC18 optimization bug has been fixed
 5.093  Fixed in issue with setup_adc() function for setting cont mode for PIC16/18 devices with an ADC2 peripheral
 5.093  Updated #use touchpad() library to create an int16 array for the TOUCHDATA global array variable
 5.093  Fixed an issue with assigning I2C pins with #pin_select for PIC18FxxQ10 family
 5.093  Added PIC18FxxQ43 family to compiler
 5.093  Added a NOP at the start of program memory for PIC18FxxQ10 chips to avoid a chip startup problem
 5.093  Added a work-around for the PIC18FxxQ10 ADC errata
 5.092  i2c_transfer() functions fixed when using stream identifiers with functions in PCD.
 5.092  Fixed an issue with clearing #use rs232() errors on PIC18FxxK42 devices.
 5.092  Fixed an issue passing a variable to discreet I/O functions on newer PIC18 parts.
 5.092  The compiler now tolerates better function pointer declarations inside a parameter list.
 5.091  Fixed an Index out of Bounds issue in the IDE Wizard that a couple devices were having.
 5.091  Updated debugger for PIC24FJ256GA406 family that was causing some logic to fail, while(i>0) for example, when stepping in/over line.
 5.091  Updated some Enh-16 debuggers to fix an issue with reading/writing EEPROM memory from debugger Data EE window.
 5.091  Fixed an issue with disabling ADC peripheral for PIC16F18426 family.
 5.091  Fixed the ROM tab of the debugger to show all the memory.
 5.090  An optimization bug affecting most PIC18 parts and the baseline PIC16 parts is fixed
 5.090  Added a debugger for the PIC16F177x family
 5.090  Improved error detection for when an incorrect stream identifier is passed to I2C functions
 5.089  #rom crc16 problem affecting some programs is fixed
 5.089  An optimization bug affecting K42 parts is fixed
 5.089  Fixed an issue with setting break points in the debugger on some Enhanced 16 devices
 5.089  Fixed an issue with reading and writing eeprom memory with the debugger on the PIC16F183xx family
 5.089  Updated i2c_read() function so for 1 param it figures out if it is stream or ACK.
 5.089  Added a new i2c_write_slave() function so slaves can push data to the master in an ISR without waiting
 5.089  Added MAX_BAUD option to HW #use spi() to make the baud rate <= instead of as close as possible
 5.088  #bit now allows you to reference another variable id
 5.088  A problem with malloc() in multiple compilation units is fixed
 5.088  A problem with port G on the PIC16F19197 family is fixed
 5.088  make32() has been updated to allow typecasting to specify the parameter sizes
 5.088  An optimization bug affecting 24 bit parts and -= when there are mixed types is fixed
 5.088  A PIC18 optimization bug dealing with accessing constant float arrays is fixed
 5.088  A problem with #bit on the K42 parts in some expressions is fixed
 5.088  #export fixed to export rom data
 5.088  #rom crc16 updated to allow multiple crc's in the same program
 5.088  A PIC24 optimization bug affecting printf's with several very complex expressions is fixed
 5.088  A code generation for the PIC18 Linux compiler that generated extra instructions for ~ is fixed
 5.088  Fixed an issue with INTR_NORMAL and INTR_ALTERNATE setting/clearing incorrect bit for some PCD devices
 5.088  Fixed an issue with read_adc() function reading incorrect register in some cases on K42 and K83 devices
 5.088  Fixed a PCD issue causing i2c_write() to hang when operating as Master and sending the I2C global address
 5.088  Fixed an issue with the K42 debugger that required pressing Run button twice in some cases to get it to run
 5.088  Added a debugger for PIC18FxxQ10 devices
 5.088  Added some new features to Interface Designer program, and fixed a couple bugs in C Code generation that was causing exceptions to occur.
 5.087  Added new spi_transfer(), spi_transfer_read() and spi_transfer_write() functions to #use spi() library.
 5.087  Updated #use rs232() to be able to use hardware enable pin on PIC18FxxK42 and PIC18FxxK83 devices.
 5.087  Wizards updated for devices with remappable peripheral pins.
 5.087  Fixed #use spi() when setup for a software implementation on PIC18FxxK42 devices.
 5.087  setup_adc_ports() now sets analog pins above AN50 correctly on dsPIC33EVxxxGMxxx devices.
 5.087  Fixed an issue on some devices with built in segmented LCD peripheral not initializing segments correctly.
 5.087  ccsc.exe was sometimes generating a Windows error from MPLAB, this is now fixed.
 5.087  A linker error when using dynamic memory (malloc) is fixed.
 5.087  The register qualifier has been updated to support bit variables.
 5.086  New setup_mf_capture() & get_mf_capture() functions for the 18F4431 Motor Feedback Input Capture.
 5.086  Fixed some issues with the read/write_configuration_memory() on PCD.
 5.086  Fixed an issue when using Timer 0 for RTOS on some newer PIC18 devices.
 5.086  Fixed an issue with PCD H/W i2c_transfer() function slave ACK.
 5.086  Wizard updated for the newest ADC peripherals and remappable peripheral pins.
 5.085  Fixed a few issues with #use pwm() not working on some PCD chips in some configurations.
 5.085  Fixed an issue with #use pwm() not working on K40 devices, when using hardware PWM.
 5.085  The IDE editor was modified to not jump around at the end of a file.
 5.085  Fixed a bug with less than or greater than with a variable integer and constant float.
 5.085  An issue with the USB library in case sensitive projects is fixed.
 5.084  A problem in debugging where some fuses were not set right on some parts is fixed.
 5.084  A problem where paths were sometimes stripped off module names in the project file is fixed.
 5.084  An optimization bug is fixed where the disable interrupts for protected functions could be a little late.
 5.084  Relational operators were not working right on 8 bit chips when they involved constants larger than the type.
 5.084  The compiler now matches void pointers to any pointer for overloaded function selection
 5.084  An attempt to initialize a local static variable with another local variable now throws an error.
 5.084  Support for CK chips added.
 5.084  Fixed issue with #use delay() giving error for restart_wdt option in the PCD compiler.
 5.084  pwm_set_duty_percent() function no longer sets duty to 0% when 100% is specified with S/W PWM at max resolution.
 5.084  Invalid type qualifiers on a typedef id now throw an error.
 5.084  Optimized negative global initializers were sometimes skipped, now fixed.
 5.084  A problem with #define scope when using #module is fixed.
 5.084  Overlapping #rom now gives a hard error instead of a warning.
 5.084  #undef was not always undefining the id, it does now.
 5.083  Support for dual core chips has been added.
 5.083  A debugger issue with K42 parts is fixed.
 5.083  A problem compiling some projects in MPLAB-X is fixed (file not found "").
 5.083  Fixed an issue with setup_spi() for PIC18FxxK42 family when setting up SSx polarity.
 5.083  Updated #use rs232() for the hardware UART on K42/K83 so the level is right when the peripheral is idle.
 5.083  Corrected IOC and some ADC defines for K42 devices.
 5.083  Fixed some issues with i2c_transfer() functions when using hardware I2C peripheral on K42 and K83 devices.
 5.083  Updated i2c_transfer() functions to return ACK/NACK bit.
 5.083  Slave i2c NACK's now cause the i2c_transfer() functions to do an I2C stop and exit immediately.
 5.083  Fixed an issue with pwm_set_duty_percent() function on some devices when setup for a Software PWM.
 5.083  Some pointer type mis-match warnings in the standard header files is fixed.
 5.083  Fixed a global variable corruption issue with write_program_eeprom() and ENH16 devices.
 5.082  Passing variables to output_xxxx() on K42 devices is fixed.
 5.082  Fixed an issue with H/W I2C on dsPIC30F devices not returned correct value for first read.
 5.082  Fixed an issue with i2c_transfer() function not using correct stream when using multiple I2C streams.
 5.082  An IDE issue with comment highlighting is fixed.
 5.082  Debugger support for ICD4 and PICkit4 added.
 5.082  A typing issue with parameters declared as pointers to pointers is fixed.
 5.082  An optimization bug when there is a lot of bank switching in a conditional of an IF is fixed.
 5.082  setup_pmp() registers were wrong for some chips, now fixed.
 5.082  An optimization bug related to bit field comparisons is fixed.
 5.081  An error 103 when MPLAB uses both / and \ in the path is fixed.
 5.081  A error with the reset vector on a PIC16F570 when interrupts and internal osc are used is fixed.
 5.081  A bug with int1 arrays inside structures on some parts is fixed.
 5.081  In PCD some constants were not properly promoted to the right type for an expression.  Now fixed.
 5.081  An optimization bug affecting SFR's on K42 parts is fixed.
 5.081  A bank switching optimization bug affecting all PIC18 parts is fixed.
 5.081  Help files have been updated
 5.081  Many example programs have been updated.
 5.081  Added built-in functions for SENT peripheral.
 5.081  Added built-in functions for the new DMA peripheral for newer PCH devices.
 5.081  Fixed an issue with crc_calc() functions returning incorrect value for some PCD devices.
 5.081  Fixed an issue with Interface Designer not downloading some images correctly.
 5.081  Fixed an issue with #use I2C() calculated baud rate incorrectly for some PCD devices when using HW I2C peripheral.
 5.081  Updated set_pwmx_duty() function for newer M/H devices to accept 8 or 10 bit values like the older parts.
 5.080  The compiler now treats small PCD constants as an int16 instead of int8 for ANSI compliance.
 5.080  A problem with memcpy() throwing an error under Linux is fixed.
 5.080  A bug involving passing arrays to an inline function for some chips is fixed.
 5.080  A problem with some fields with a indirect type inside a const struct throwing an error is fixed.
 5.080  A linker error finding files when an output directory is used is fixed.
 5.080  Fixed issue with assigning output pins with #pin_select and pin_select() function on some PCD devices.
 5.080  A bug in make32 for PCD parts when assigned using an indirect address is fixed.
 5.079  A problem with some interrupts on the K42 parts starting in the wrong bank is fixed.
 5.079  A problem with the IDE finding units when the output directory is specified is fixed.
 5.079  A wrong warning 227 on some chips and options is fixed.
 5.079  The ++ operator when used on multi-byte fields in a packed structure sometimes did not work.
 5.079  A PIC24 optimization issues was fixed related to integer to float conversion.
 5.079  A PCH problem with function pointers inside structures for some syntaxes is fixed.
 5.079  A fix was made for dual partition mode.
 5.079  Fixed restart_wdt() for devices with a WWDT and window is set to less then 100 percent.
 5.079  Fixed issue with port_x_pullup() function not clearing WPUEN bit for some chips.
 5.078  Fixed an issue with the PLL for K42 devices when using an external clock source.
 5.078  Some PCD functions called from an ISR were not being protected when also called from main().
 5.077  Added debugger support for the K42 parts.
 5.077  Fixed an issue with the UART2 and I2C2 peripherals for the K42 device family.
 5.077  Fixed an issue with #use rs232() transmit buffer sometimes sending an extra character in the PCM and PCH compilers.
 5.077  Fixed an issue with #pin_select and RX1 not assigning UART receive pin correctly for PIC16F1579 family.
 5.077  A problem with multiple compilation units using stdlib.h on some parts is fixed.
 5.077  Object file size differences between compiles due to inconsistant optimization is fixed.
 5.077  A PIC18 bug with the -- operator on complex indirect addresses is fixed.
 5.076  Added i2c_transfer(), ic2_transfer_in() and i2c_transfer_out() built in functions.
 5.076  Added HW I2C support for K42 devices, Master mode must use new transfer functions.
 5.076  Fixed a couple register address issues with port_x_pullup(), write_eeprom() and read_eeprom() for K42.
 5.076  Fixed an issue with #use rs232() when using even or odd parity and K40 devices.
 5.076  Fixed an issue with #use rs232() when using even or odd parity and transmit buffer.
 5.075  The syntax "#define x  x" is now treated as it is in a GNU compiler.
 5.075  An incorrect opcode showing up in the PIC16F188xx LST files is now fixed.
 5.075  The constant string limit has been increased for chips that can support it.
 5.075  Some _fixed(x) problems when mixing types have been fixed.
 5.075  PCD output_toggle() function now accepts a variable for the pin to toggle.
 5.075  Fixed issue with CCP peripherals for PIC16F176x family.
 5.075  Fixed issue with setup_pwm9() function for PIC16F1778.
 5.075  Fixed issue with set_adc_channel() function incorrectly clearing ADC reference bit for PIC16F1914 family.
 5.075  Fixed issue with assigning PIN_D0 to peripheral with #pin_select for PIC18FxxJ94 family.
 5.075  Fixed issue with enable_interrupts(INT_CN_PIN | PIN_xx) not working for some PCD devices.
 5.075  Fixed issue with clcx_setup_input() function not working for PIC16F18877 family.
 5.075  Fixed issue with assigning pins to T3CKI and T5CKI with #pin_select for PIC16F18345 family.
 5.075  Various Interface Designer fixes and updates.
 5.074  Fixed an issue with the HW I2C not working for some PCD devices.
 5.074  Fixed an issue with pin_select() function not working for some devices.
 5.074  Added read_device_info() and read_config_info() for devices that have a Device Information Area (DIA/DCA).
 5.074  Fixed an issue with Interrupt flags not being cleared correctly on PIC16F188xx devices in some cases.
 5.074  Fixed an issue with #use delay() setting clock configuration fuses incorrectly for some dsPIC30F devices.
 5.074  Fixed issues with "Verify Blank", "Verify Chip=File", "Read Chip", and "Erase Chip" when using LoadNGo and Prime8 in CCSLoad.
 5.074  Fixed clock speed calculation for the 24FKL family debugger.
 5.074  Fixed issues with cursor position in IDE when line numbers are hidden.
 5.074  Fixed an issue where code completion in the IDE would replace too much text.
 5.074  Added debuggers for the 16F183xx, 16F188xx, and 16F1703/7 families.
 5.074  Debugger lines numbers being off when passing a source line on the command line is now fixed.
 5.074  A problem with -= on 24 bit parts when used in an expresion with a -> is fixed.
 5.074  An enhanced16 optimization bug in some interrupt handlers is fixed.
 5.074  A problem with #id and multiple compilation units is fixed.
 5.073  CHAR_BITS in limits.h is now 8.
 5.073  Warnings about memory already used with #rom are fixed.
 5.072  Updated PCD crc_calc() functions to work same as PCM and PCH compilers and added ex_crc_hw().
 5.072  Fixed an issue with #use pwm() and the pwm_set_duty_percent() function when used to set the duty to 100% it would instead set it to 0% is some cases.
 5.072  Fixed an issue with #pin_select for PIC18F24K40 and PIC18F25K40 devices.
 5.072  Fixed an issue with setup_comparator() and dac_write() function for PIC18F14K22 family.
 5.072  Fixed an issue with setup_oscillator() function for PIC24FJ1024GA606 family that was causing it to not perform the clock switching procedure correctly.
 5.072  Fixed an issue with write_configuration_memory() function for PIC24F32KA304 family.
 5.072  Added debuggers for 24FJxxxGx7xx and 16F153xx families.
 5.072  Fixed some issues displaying the statistics file in the IDE.
 5.071  Support for the newest devices has been added.
 5.071  Added support for time.h to tick.c driver.
 5.071  Fixed issue with set_tris_x() function for PIC16F527.
 5.071  Fixed an issue with read/write_program_memory() when using a structure element for the address in PCH.
 5.071  Fixed an issue with #pin_select for PIC18F24/5K40 devices because of an errata.
 5.071  Updated #use touchpad() for the PIC18FxxJ94 family when using a 64MHz system clock.
 5.070  An internal error when using USE TOUCHPAD is now gone.
 5.070  port_d_pullups() is now fixed for K40 parts.
 5.070  Updated the COF file format to be able to debug more than 65K lines.
 5.070  A PCH optimization bug (opt>5) has been fixed.
 5.070  PCD RAM memory allocation is now more efficient.
 5.069  RAM allocation has been optimized to reduce unused gaps.
 5.069  Updated write_program_memory() function to fix a trap issue on 24 bit Gx6xx parts.
 5.068  A problem with K40 interrupts is fixed.
 5.068  A bug with two dimensional arrays is fixed.
 5.067  A decompression database error for some parts is now fixed.
 5.067  Added the PIC18FxxK40 family debugger.
 5.067  Fixed an issue with PIC16F18877 and PIC16F18875 that was causing compiler to access a register incorrectly.
 5.067  Fixed a couple issues for PIC16F1619 family which was causing built-in PID and CCP functions to not work.
 5.067  Fixed an issue with #opt compress for Enhanced 16 devices.
 5.066  New graphical Interface Designer now included with the IDE compilers.
 5.066  IDE now supports Ctrl++ and Ctrl+- shortcuts to quickly zoom text.
 5.066  Fixed an IDE issue with editor bookmarks when using "Save As".
 5.066  IDE Debugger "Debug Configure" tab can now supply VDD to the target while debugging with the ICD-U80.
 5.066  Fixed an issue with #use spi() and #use fixed_io() for PCD compiler.
 5.066  Fixed an issue with #use delay() writing incorrect register for OSC TUNE bits on some dsPIC30F devices.
 5.066  Added some missing PIC18LF chips to USB driver.
 5.066  Fixed an issue with interrupt relocation for PIC18 USB Bootloader.
 5.066  An Enhanced PIC16 problem with PCLATH being corrupted after some calls via function pointers is fixed.
 5.065  Added ability to open history files from the File History Viewer in the IDE.
 5.065  A bit_set/clear bug was fixed in PCD when using multi-byte indirection.
 5.065  An undeserved error message for some sprintf() uses is now fixed.
 5.065  Fixed issue in the IDE with "Open File at Cursor" when the file is not in the main project directory.
 5.065  Fixed an issue with the adc_read() function for MCP1911x devices.
 5.065  Fixed an issue with #use touchpad for PIC18F45K50 family.
 5.065  Fixed an issue with spi_init() function that could cause a trap to occur for PIC24 GA/GB2xx, GA/GB4xx and GA/GB6xx families.
 5.065  Fixed a setup_compare() issue when used with re-mappable peripheral pins not assigned
 5.064  A PCD bug with some complex math operations when indirection is used is fixed.
 5.064  A device database issue affecting small chips with only one GPIO port is fixed.
 5.063  Added support for the PIC18F27K40 Family.
 5.063  Fixed an issue with get_timer_3() get_timer_5() and get_timer_7() for some PIC16 devices.
 5.063  A math error related to fixed point multiplication is fixed.
 5.063  Added 33EPxxGS50x programming support.
 5.062  Fixed an issue with erase_program_eeprom() function for PIC12F617.
 5.062  Fixed an issue with Software Slave SPI returning incorrect results in some modes.
 5.062  Fixed an issue with interrupts on some 24 bit devices.
 5.062  Fixed an issue in reading RAM in PCW debugger for some PIC16s.
 5.062  Fixed a problem with #build(bootload) for some PIC16 parts.
 5.061  delay_cycles(1) was fixed to generate a single NOP like it used to.
 5.061  Some undeserved warnings concerning enum and pointers are fixed.
 5.060  A bug in definedinc() when used in the preprocessor is fixed.
 5.060  A problem #reserve'ing registers in bank 15 of 16 bit parts is fixed.
 5.060  A bug concerning #module and preprocessor identifiers is fixed.
 5.060  An internal error when some pin combinations are used in #USE TOUCHPAD is fixed
 5.060  A bug in #opt compress is fixed.
 5.060  Fixed a bug with #use i2c() when specifying hardware pins on devices that only have Slave I2C.
 5.060  Fixed a bug with setup_wdt() in PCD when using it to set the WDT timeout time to 1 ms or 2 ms.
 5.060  IDE debugger now has the correct RAM size for all chips.
 5.060  IDE debugger now correctly reads mouse-overs, watches, and SFRs/peripherals that are in high RAM addresses.
 5.060  IDE debugger no longer attempts to read unimplemented or invalid RAM addresses.
 5.059  Fixed bug with spi_xfer() function not returning correct value in certain cases.
 5.059  Fixed function used but not defined error on some devices for setup_comparator_4().
 5.059  Fixed an issue with assigning High-Speed PWM unit to Secondary Time Base.
 5.059  Updated MPLAB-X tool interface to work with the latest MPLAB-X version.
 5.059  Programming/debugging support added for the Microchip Curiosity board.
 5.059  Fixed an IDE issue with code folding source lines with multiple braces on the same line.
 5.059  Fixed an IDE problem where Read-Only files could still be edited by the user.
 5.059  Added to the IDE: open > Source File Read Only.
 5.059  A bug in the ?: when the argument type is pointers to ROM is fixed.
 5.059  Some undeserved string truncated and enum/pointer mis-match warnings are now removed.
 5.059  Several device database fixed have been made.
 5.058  A debugger problem with some 24 bit parts is fixed.
 5.058  Some device database problems with certain parts are fixed
 5.058  Some warning problems are cleaned up.
 5.058  New RS232_BUFFER_ERRORS variable for use when using buffered RS232.
 5.058  Second ADC module now fully supported for the 16F18855.
 5.058  #use pwm and setup_vref() functions fixed for some chips.
 5.057  #use i2c now defaults to hardware mode when hardware pins are specified.
 5.057  A bug in #use timer when timer 0 is specified on some chips is fixed.
 5.057  A mouse-over issue when viewing structures is cleaned up.
 5.057  A debugger problem in PCM when stepping over in-lined functions is fixed.
 5.057  Some undeserved warnings "Pointer types do not match" have been removed.
 5.057  A optimization bug on PCD when using >> with mixed types and one type is an int32 is fixed.
 5.057  A problem with a multiple + operators on bytes with a non-byte assignment on PIC16/18 parts is fixed.
 5.056  Some undeserved warnings about mis-matched pointers is fixed
 5.056  Added support for the PIC16F188xx parts
 5.056  IDE now has a wraparound search feature
 5.056  A typecasting problem with ROM pointers on 128K parts is now fixed
 5.055  Fixed a problem with some PIC24 parts where the configuration words were in the wrong location
 5.055  Corrected some PIC24 I2C glitches
 5.055  Fixed a problem with the setup_hspwm_unit() function on parts with a PWMLOCK fuse
 5.054  A problem with the SPI bit rate on some PIC16/18 parts is fixed
 5.054  Fixed the dac_write() on the dsPIC33...GS parts
 5.054  A bug preventing the CNI interrupt from enabling in some circumstances is fixed
 5.054  A PWM issue with the PIC16F18345 part is fixed
 5.054  See the readme.txt file for a few new features
 5.053  A corrupted device database in the V5.052 release is fixed
 5.052  Variable length argument functions now allow a single parameter
 5.052  A bug with some 16 bit additions done in a call to spi_write() has been fixed
 5.052  A problem with the bit order in lcd_symbol() when used with 16 bit segments is fixed
 5.051  A linker bug affecting multiple compilation unit builds is fixed
 5.051  A segmentation fault for some Linux compiles is fixed
 5.051  An optimization error involving << with mixed byte and dword operands is fixed
 5.051  Fixed a syntax error with spi_write4() and spi_read4() functions for 24 bit parts
 5.051  Fixed a syntax error with #pin_select for some PIC18 devices
 5.051  Fixed a bug when #opt compress is used on some programs
 5.051  Fixed an issue with #use pwm and MCP1911x devices
 5.051  The 24 bit Wizard now has a MODBUS configuration page
 5.050  Support for the new 4x chips is in
 5.050  An incorrect warning concerning enum assignments is removed
 5.050  A linker bug that sometimes combined global variables with the same name is fixed
 5.050  Added USB and TCP/IP wizards for 24 bit parts
 5.050  Fixed a bug in #USE PWM for parts with more than 6 remappable OC pins
 5.050  Added a PLL_WAIT option to #use delay to wait for the PLL to start up
 5.050  Fixed a bug in tx_buffer_available() where the wrong count was returned
 5.050  Fixed a bug when negative number were used with %W on 24 bit parts
 5.050  Added a feature to use OSCTUNE on 24 bit parts to get the requested clock speed
 5.049  Added support for the new and different 24 bit GS chips and the 16F183xx chips
 5.049  A problem with PIC24 function pointers inside a structure in large memory spaces is fixed
 5.049  Debugger issue with some floating point numbers is fixed
 5.049  Fixed a bug involving signed ints in a switch statement
 5.049  An inline assembly error when using an indirect goto is fixed
 5.049  Debugger now shows a full 32 bit enum as it should
 5.048  Compiler now does type checking on EXTERNs
 5.048  A compiler IDE hang problem with some complex structures is fixed
 5.047  A bug converting some floating point numbers just below zero to an integer is fixed.
 5.047  A bug with 32 bit enum's is fixed
 5.047  A problem with the 1705 comparator is fixed
 5.047  IDE mouse-over improved for structures and ROM variables
 5.046  Fixed an problem with -> where the target was a bit field of another structure on PCM parts
 5.046  An IDE issue with error files kept outside the project directory is fixed
 5.046  A wrong checksum in "#ID checksum" when using #fill_rom is fixed
 5.046  A PIC24 problem with oversized printf widths on %LU and %LD is fixed
 5.046  Support for auto clock tuning is added for chips that have this feature
 5.046  A #USE RS232 bug is fixed when buffers larger than 256 are specified 
 5.045  #locate now issues a warning if you locate a variable on top of another
 5.045  A PIC24 problem with the < and > operators on floats with interrupts is fixed
 5.045  A problem with multiple compilation units and some static variables not being zeroed is fixed
 5.045  A warning in string.h has now been eliminated
 5.045  A bug allocating multiple odd sized rom structures in PIC24 is fixed
 5.044  Fixed a bug in PCD in subtraction of 32 bit numbers in complex expressions involving the -> operator
 5.044  A warning in string.h is now gone
 5.044  Corrected a formatting issue in %W (%LU, %LD should not have been affected)
 5.044  A file signing issue has been resolved
 5.043  Forward referencing a 'rom' data item with & in an initializer is now accepted
 5.043  The default fuse settings have changed back to the way they were in older compilers
 5.043  Fixed a type conversion problem between float and int in some relational expressions on a dsPIC
 5.043  The address used for & on large "rom" structures when passed to a  built in function on PIC24 is fixed
 5.043  setup_wdt() in newer 12 bit parts no longer glitches the pull-ups
 5.043  A number of updates have been made for the new EV chips
 5.042  An error 103 on Win7/8 computers with full access control enabled is fixed
 5.041  An access violation for some users starting the PIC24 Wizard is fixed
 5.041  A problem with %w where if the digit after the . was 0 it did not output on the PIC24 is fixed
 5.041  Syntax errors that should have appeared for poorly formed bit_test() calls now appear
 5.041  A bug is fixed that occurred with packed structures inside unpacked structures accessed with ->
 5.041  Some issues with bit arrays inside non-RAM structures is fixed
 5.041  An error for two RS232 ports without stream names is removed
 5.040  An undeserved warning about a #define blocking a C ID is fixed
 5.040  Memory allocation issues from 5.039 are fixed
 5.040  A bug with bit arrays indexed with constants inside structures is fixed
 5.038  A problem with clear_interrupts() on some PIC16-18 interrupts is fixed
 5.037  The PIC24 printf() %w no longer forces the leading zeros
 5.037  Extra trailing commas in initializers now generate a warning
 5.037  Some issues with pre-processor continuation lines (\) are now fixed
 5.037  Optimization bugs dealing with some ROM pointers and clear_interrupts(INT_RB) are fixed
 5.037  The new dsPIC33EV parts have been added
 5.036  A problem with the IDE finding hex files in alternate output directories is fixed
 5.036  A problem with very large delays on chips with slow clocks is fixed
 5.036  Various IDE tweaks
 5.035  A delay_us() problem in 5.034 where it takes more ROM than needed is fixed
 5.035  A RAM allocation problem with PIC16 parts that use interrupts and 32 bit math is fixed
 5.034  Some problems with complex expressions involving -> have been fixed
 5.034  Error message added for cases where the . operator was misused
 5.033  Added new macro _unicode(), see readme.txt for details
 5.033  New warning added for cases where a #define hides access to a variable ID
 5.033  Some pointers to ROM bugs have been fixed on the 14 bit parts
 5.032  Corrected a problem in 5.031 that did not initialize pins to digital for some chips
 5.031  Fixed a PIC24 bug in bit_set() and bit_clear() when using some structure fields
 5.031  Fixed a PIC24 bug in %w when used with signed numbers
 5.031  Optimized RAM allocation for the PIC16 and PIC18 compiler
 5.031  Optimization improvements for PIC18
 5.030  A bug causing main() to hang on some PIC24 parts is fixed
 5.030  An optimization bug in a 32 bit shift when used in complex expressions is fixed
 5.030  A problem with the [*] in PIC18 parts with more than 64K ROM is fixed
 5.029  setup_oscillator() has been updated to deal with glitches for some chips
 5.029  memcpy() updated to improve optimization 
 5.029  A problem with %s in sprintf() when the string is empty on some parts is fixed 
 5.028  Include file search rules have been tightened up to only look in specified directories
 5.028  An optimization error initializing some large arrays on a PIC18 is fixed
 5.028  sprintf optimization has been improved
 5.028  A undeserved debugger error reporting a bad device ID is fixed
 5.027  A problem with very large constant structures in PCH is fixed
 5.027  read/write_configuration_memory() now work on the ID area in Enhanced 16 chips
 5.027  Fixed the export of register definitions to an include file for the chips that had a wrong word addresses
 5.027  Added new chips and expanded built in functions for some of the newer chips
 5.027  Improved the IDE "Replace All" function
 5.027  Added new project history tool to IDE
 5.027  Bug in #use SPI that sometimes set the baud rate to 0 is fixed
 5.027  Bug in #use delay for some J11 chips when using the PLL is fixed
 5.027  Added __BUILDCOUNT__ id when global defines are enabled
 5.027  IDE now allows user defines file extensions to be associated as source code
 5.027  Navigation bar in the IDE now allows sub-folders
 5.027  IDE tweaks made for VISTA and Windows 8.1
 5.027  Added "Split file tabs" option to IDE
 5.026  The #use touchpad library has been updated for devices with two cap sense units
 5.026  Built in functions for the 16F1713 family have been added and updated
 5.026  Various updates to the IDE Wizard
 5.025  A problem where the wrong type was used when adding a subscript to an array of pointers is fixed
 5.025  A bug on PIC24 parts dealing with the -> operator and some bit fields is fixed
 5.025  A problem with #opt 9 when initializing large RAM data structures is fixed
 5.025  An interrupt context save issue for PIC18 parts when compiling in the ANSI mode is fixed
 5.024  Fixed the project include file paths that were being corrupted on some versions of Windows
 5.024  An internal error during a compile of some programs on some PC's is fixed
 5.024  #rom directives with no type specified targeting the data EE now default to int8
 5.023  addressmod ranges are now supported on non-RAM memory spaces
 5.023  Extra characters at the end of a #IF are now being flagged as an error
 5.023  For PIC18 dual priority mode, the compiler now only uses GIEH to disable all ints
 5.021  A file access issue when linking some projects on Win7/8 systems is fixed
 5.021  A problem with using the RTOS with multiple compilation units is fixed
 5.020  #rom has been updated to properly deal with the EEPROM on all chips
 5.020  Fixed a bug dealing with subscripted pointers to large (>256 bytes) data items on PIC18
 5.020  Mouse-over bug in the debugger is now fixed
 5.019  A problem with addressmod for some chips and data types is fixed
 5.019  #fuses keyword PROTECT now also sets CPB on devices that have CPB, see readme.txt
 5.018  IDE now allows a separate output file directory to be specified
 5.018  Updates made for the latest MPLAB version
 5.018  A problem with the encoding on an inline assembly MAC or MSC instruction is fixed
 5.017  Various device database fixes have been made for specific chips
 5.017  A problem with multiple assignments of a full structure in one expression is fixed
 5.017  A bug involving pointers to functions on some chips is fixed
 5.017  Some IDE issues running older versions on Win7/8 machines is fixed
 5.016  A problem with the debugger recognizing all the files in a MCU build is fixed
 5.016  An optimization bug on PIC18 parts with some switch statements is fixed
 5.015  A device database issue causing some 24 bit parts to not verify right is fixed
 5.015  A problem setting breakpoints in multiple compilation unit projects is fixed
 5.014  An issue with #rom taking too much space and sometimes issuing a warning is fixed
 5.014  Help file has been brought up to date
 5.014  #profile has had some improvements and there is now an example program
 5.013  A problem with printf disabling interrupts on some parts is fixed
 5.013  A type cast problem when casting to single bit is fixed
 5.013  The PIC24 compiler now allows all variations of the mov.b asm instruction
 5.013  Some issues with finding the right include file path are resolved
 5.013  A problem with some expressions with both a shift operator and pointer to an int32 is fixed
 5.013  The compiler now allows overloaded two functions one with *ptr and the other rom*ptr
 5.013  Various IDE and Wizard fixes are in
 5.012  Missing register entries for some chip is now fixed
 5.012  Fixed is a #zero_ram problem causing the processor to hang on reset for some chips
 5.012  An IDE issue with the scrollbar when switching tabs is fixed
 5.012  An access violation problem in the IDE is fixed
 5.012  The background compile in the IDE is improved for large projects
 5.011  An error related to setw() when writing to strings is fixed
 5.011  The port_x_pullups() was not working on a few chips and is now fixed
 5.011  #import now allows importing data to areas reserved with #org like V4
 5.011  Fixed some IDE cut/paste issues
 5.011  Fixed some IDE syntax highlighting issues
 5.010  A profiler problem with some PIC24 parts is fixed
 5.010  An file access error on Win7/8 builds for multiple compilation units is fixed
 5.010  Various IDE fixes and updates
 5.009  Some IDE tweaks have been made to improve usability
 5.009  A bug in the #use profile directive for 24 bit parts is fixed
 5.009  PIC16 interrupt latency caused by some printf's is fixed
 5.008  Tree views in the IDE can now be saved as a bitmap
 5.008  Compiler versions can now be associated with projects
 5.008  A number of IDE updates have been made including Find/Replace
 5.007  A problem with TAB's in the IDE is fixed
 5.007  A error is no longer issued with some parameter list items with **
 5.007  A PCD error with the #use profile is fixed
 5.006  Corrected incorrect RAM registers for PIC10F/LF320
 5.006  Added missing defines in some header files
 5.006  Corrected Editor Options page in IDE to prevent crashes and incorrect saving
 5.006  Fixed "Index out of bounds(xx)" error that was causing IDE to crash
 5.006  Some changes made to declarator parsing to better match ANSI
 5.005  First public release of V5