Strange Message From Debugger

tigrou · Joined: 15 Sep 2004 Posts: 2

Hello

When i start the debugger with the ICDU from CCS Compiler i have the message "The ICD Unit has an old version of firmware. Use "Configure hardware" in the configuration tab to update.

I have the 3.202 Compiler.
I have the last ICDU.exe (2.12)
And i have updated the firmware of the ICDU Unit (1.29)

Have you some idea ?

ninjanick · Joined: 25 May 2004 Posts: 25

I believe that is the latest firmware (1.29). Does it come up all the time?

Haplo · Joined: 06 Sep 2003 Posts: 659 Location: Sydney, Australia

I had this problem once. Try updating it one more time. This may make the error go away.

tigrou · Joined: 15 Sep 2004 Posts: 2

to ninjanick:

yes it's the latest firmware 1.29 (13/09/04) and the warning message come up all the time i start a debug.

To haplo:

I have reloaded the new firmware three time, but the message come again !!!

Other idea's ?

PS) Thanks for ninjanick and haplo

Remo · Guest

@all

The ICD Unit has an old version of firmware

i have the same problem,
anyone have an solution?

thx Laughing

Humberto · Posted: Sat Oct 09, 2004 3:44 pm

My first week with the ICD-S40

I have the 3.190 Compiler.
I have the ICD Control V2.12
And i have updated the ICD-S40 firmware to V1.29

PIC16F628 @8000000Mhz
The Unit seems to work, it pass all the built in tests succesfully.
I can program and load the PIC properly and after that I get the following messge: