ICDWarn0035: Debug mode must be disabled. Disable debug mo

[franckcl]

Hi,

MPLAB 6.60, CCS 2.07, PIC 16F876

When I run MPLAB in programmer mode, and when I program the PIC I have this error message :
"ICDWarn0035: Debug mode must be disabled. Disable debug mode or cancel?"

Is there a solution in the fuses?? to remove this message.
Thank you
Franck

[Mark]

Do you have ICD=True in your code? If so, comment it out.

[franckcl]

here is my program :

#device PIC16F876
void Main()
{
}

And when I try to program the pic, I have always this error message.
Franck

[Haplo]

For the starters, ALWAYS include the corect header file for your PIC and make sure you have proper #fuses settings in your code. Something like:

[franckcl]

It's works !!! I don't know why but it's works !!!

I have copy my project in an other one with a different name and now, I don't have this error message.
Strange..........
thank you for your help
Franck

[Mark]

[Haplo]

As I said, always include the corect header file for your PIC and make sure you have proper #fuses settings in your code. Fuses like XT (oscillator type), NOLVP (No voltage programming) and NODEBUG are important (based on your circuit you may need to choose other values for them though).
And never let your code reach the end of main(). Always use a while(1); or something similar to prevent this.