eeprom: first address in #rom directive

[golf]

i'm making a program for the pic18f2550
i must use the #rom directive, to program an initial value in eeprom, which may change
i have been searching in the programming specs for the address to put in the directive; i found id address, program code address, but i couldn't find the eeprom address

do you know which address is the first?

i would like to put something like this:
#rom address={...}

[Ttelmah]

0xF00000

Section 5.5, in the programming data sheet.

Best Wishes

[golf]

found!
maybe i skipped reading this little point

thanks

[Ttelmah]

It is not exactly 'obviously' laid out. Like me, the first time I looked, you probably went to the bit about the EEPROM, expecting to see the address there...

Best Wishes