CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Device ID readout from ICD control program

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Christophe



Joined: 10 May 2005
Posts: 323
Location: Belgium

View user's profile Send private message

Device ID readout from ICD control program
PostPosted: Tue Apr 22, 2008 6:23 am     Reply with quote
Hi,

I was just wondering; on the advanced tab of the ICD control program, you can readout the device ID.

What is this exactly and what it's used for? Is it different for every chip? Is it another code for the chip's name (eg PIC16LF877A gives me device ID 0E28)
Ttelmah
Guest
PostPosted: Tue Apr 22, 2008 7:55 am     Reply with quote
It is the chip's 'version number'. The details are in the data sheet (on newer chips - for older chips there is a separate sheet about these), but typically, several of the bits (normally11 bits) actually say 'this is a 16LF877A' and the other five bits give the 'silicon revision', and will change with different chip releases.
It is the same for every chip from a given silicon revision.

Best Wishes
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group