CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
18F8720 ICSP

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
18F8720 ICSP
PostPosted: Sun Feb 24, 2008 3:47 am     Reply with quote
I cant program the 18F8720 . Confused
EPIC is my Programmer. I used VPP,GND,PGC & PGD.
I have done this before by 18F452 with no errors.
Douglas Kennedy



Joined: 07 Sep 2003
Posts: 755
Location: Florida

View user's profile Send private message AIM Address

PostPosted: Sun Feb 24, 2008 1:08 pm     Reply with quote
I recall having an issue like this with some 8720's a while back. My guess and it is a long shot was that some were predisposed by Microchip at the factory to wanting their first programming experience to be at LVP. I remember that a full erase (I used a picstart programmer to get around the issue) and then they took a download from My ICDU-40. My suggestion is try to get a full erase into the chip as the very first attempt to program it. After that things have a good chance of working as expected.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group