CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Cannot Work Out Checksum Calculation

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
jemly



Joined: 13 May 2007
Posts: 34

View user's profile Send private message

Cannot Work Out Checksum Calculation
PostPosted: Mon Oct 15, 2007 8:22 am     Reply with quote
We are receiving data via rs232 and we know the data is for the most part good. A 4byte checksum is sent after the data we use and I am trying to write a routine to check the validity of the data sent based on the checksum - and I'm having trouble!

We are sent 36 bytes of data then a 4 byte checksum.

I store the checksum in a byte array as follows:

Code:

BYTE checksum[4];


According to the senders of the data they exclusively OR the 1st, 4th, 8th, 12th etc..... bytes to produce the first byte of the checksum. Then they exclusively OR the 2nd, 5th, 9th, 13th etc bytes of the data to produce the 2nd byte of the checksum. And so on until all 4 bytes of the checksum are complete.

I have tried to replicate this and have simplified it for the moment to only look at whether the 2nd byte of the checksum matches the 2nd byte of my XOR - but I seem to see no checksum matches and I don't know what I'm doing wrong! Can you help? Here's my code:

Code:

boolean ValidateCheckSum()
{
   byte csCheck[4];
   int h;
   
   for (h=0;h<4;h++) {
      csCheck[h] = (data[h] ^ data[h+4] ^ data[h+8] ^ data[h+12] ^ data[h+16] ^ data[h+20] ^ data[h+24] ^ data[h+28] ^ data[h+32]);
   }
 
   if(checkSum[2] == csCheck[2]) //success
   {
      output_bit(ERROR_LED,0);
      return true;
   }
   else
   {
      output_bit(ERROR_LED,1);
      return false;
   }

}
jecottrell



Joined: 16 Jan 2005
Posts: 559
Location: Tucson, AZ

View user's profile Send private message

PostPosted: Mon Oct 15, 2007 8:49 am     Reply with quote
Code:
data[h] ^ data[h+4] ^ data[h+8]


Doesn't that take bytes 1, 5, 9, etc.,?

Shouldn't it be:

Code:
data[h] ^ data[h+3] ^ data[h+7]


But now that I think about it, their statement 'exclusively OR the 1st, 4th, 8th, 12th ' doesn't quite make sense either.

Just thinking aloud.....
jemly



Joined: 13 May 2007
Posts: 34

View user's profile Send private message

PostPosted: Mon Oct 15, 2007 8:55 am     Reply with quote
Ok maybe some confusion.... the statement "exclusively OR the 1st, 4th, 8th, 12th '" should have read "exclusively OR the 0th, 4th, 8th, 12th '".

And I've looked over my code again and I'm sure that's what I'm doing.

Code:

for (h=0;h<4;h++) {
      csCheck[h] = (data[h] ^ data[h+4] ^ data[h+8] ^ data[h+12] ^ data[h+16] ^ data[h+20] ^ data[h+24] ^ data[h+28] ^ data[h+32]);
   }


...would xor bytes:

0,4,8,12,16,20,24,28,32

....then

1,5,9,13,17,21,25,29,33

....then

2,6,10,14,18,22,26,30,34

....then

3,7,11,15,19,23,27,31,35

So I don't get why it's not working! Am I being totally blind and missing what you menat?![/code]
Ttelmah
Guest
PostPosted: Mon Oct 15, 2007 9:28 am     Reply with quote
I'd suggest perhaps posting one or two sequences of the numbers. What you do, looks 'right', assuming the data array, is declared as int8, for what you are describing.
However it may be that they are doing something different. If (for instance), the bytes selected in the first line, second, third, and fourth, advance at different rates, then the 'checksum', potentially becomes useable as a crude ECC code.
Doing the four separate bytes, really gains nothing, unless something like this is done, and I'd suspect this is the real reason for this, and that probably the advances do differ between the rows, and this is why your code doesn't agree.

Best Wishes
jemly



Joined: 13 May 2007
Posts: 34

View user's profile Send private message

PostPosted: Mon Oct 15, 2007 10:24 am     Reply with quote
TTelmah - thanks and here's some clarification. The data array is declared:

BYTE data[36];
and the csCheck array is declared:

BYTE csCheck(4);

We've checked with the people who wrote the software that is sending out the data and they are sure that this should work.........!
SherpaDoug



Joined: 07 Sep 2003
Posts: 1640
Location: Cape Cod Mass USA

View user's profile Send private message

PostPosted: Mon Oct 15, 2007 12:17 pm     Reply with quote
Can you give us a sample data packet with its checksum?
_________________
The search for better is endless. Instead simply find very good and get the job done.
treitmey



Joined: 23 Jan 2004
Posts: 1094
Location: Appleton,WI USA

View user's profile Send private message Visit poster's website

PostPosted: Tue Oct 16, 2007 8:04 am     Reply with quote
And if you talked to the software people, perhaps they can give you a "known good" packet sample.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group