CCS c not working

[Huma]

hi , i have downloaded the 30 dayz trial version of CCS C compiler.
i tried to compile an example program ,but a dialog box open and says
"Acess violation at ----- address module in PCW,exe" and it dun compile .
same prob arises when i try to compile from dos or mplab.
plz help me out i shall be very thnakful to u .
Regards,
huma

[PCM programmer]

See this post which explains how the proper compiler must be selected
in the drop-down box at the top of the IDE:
http://www.ccsinfo.com/forum/viewtopic.php?t=7170&highlight=access+violation&start=14

See this screen shot of the CCS IDE, which shows the box:
http://www.ccsinfo.com/images/content/C_aware_editor.gif

Also see the CCS demo page, which says the demo is limited to only
three PICs. Don't try to select a PIC which isn't one of those three.
http://www.ccsinfo.com/content.php?page=compdemo

Also note the "Microchip 14 bit" selection only applies to the 16F877
and 16C544 PICs in the demo.

[iso9001]

Yea, that acutally got me not to long ago.

I had been using ccs for about a year and then switched everything to my x64 workstation, tried to compile and nothing.... Spent about a hour checking different things.

[huma]

First of all thanku very much for such a quick reply.
The problem is this that the drop down menu is empty, it contains no items? how to get out of this problem.
thx in advance.
regards,
huma

[huma]

Hey ,
my prob is solved .Actually there was a problem with the downloaded demo version .Its now working well.
Thx a lot.
Regards,
huma