when i want to use 4x20 lcd, i saw that the connection of it is just like below.
B0 enable
B1 rs
B2 rw
B4 D4
B5 D5
B6 D6
B7 D7
how can i change it to
D0 enable
D1 rs
D2 rw
D4 D4
D5 D5
D6 D6
D7 D7
carmarmu
Joined: 09 May 2006 Posts: 15 Location: Valencia (Spain)
Posted: Sun May 14, 2006 10:38 am
You only must change in the LCD4x20.C libray the pins assigning them to the new pins that your you want.
If you open the librery you will see that it takes a head where explains everything.
Luck! _________________ **CaRmArMu** Valencia (Spain)
carmarmu
Joined: 09 May 2006 Posts: 15 Location: Valencia (Spain)
Posted: Sun May 14, 2006 10:40 am
Libray or librery not... library
A failed to my fingers and always in the same word
carmarmu wrote:
You only must change in the LCD4x20.C libray the pins assigning them to the new pins that your you want.
If you open the librery you will see that it takes a head where explains everything.
Luck!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum