multiple rs232

[ninebarmaximus]

am i able to use 2 rs232's on the one pic,

like could i have two declarations for using the rs232 on different pins?

and if i did that how would i specify which rs232 i wanted to use would it be something really simple like

putc(PIN_c7) for one device(obviously after declaring c7 as an output pin
and
putc(PIN_a2) for the other

is this possible or am i living in a fantasy land

cheers

[Ttelmah]

Look in the manual. Do a search on the keyword 'stream'. Alternatively do a search here on the same word.
Remember though the limitations of a 'software' serial (which is what will be used on any pins except the hardware UART ones).

Best Wishes