CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Need software help for unique bevel cutter

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Franz Grueter



Joined: 02 Dec 2004
Posts: 2

View user's profile Send private message Send e-mail

Need software help for unique bevel cutter
PostPosted: Thu Apr 06, 2006 10:58 am     Reply with quote
We have developed a unique cutting machine that can cut a slice of material at an angle. The x-y axis are controlled via a gantry type set up. The unique cutting head can turn 360 degree and the cutting tool can slope down to about 65degrees (and it is always centered along the x-y coordinates.) Conventional tool pathing software does not path that kind of motion. We are planning to import an STL file into our software. Any suggestions how best to achieve this geared motion?
Thanks, Franz
_________________
I've read all the interesting things this Hans Wedemeyer is capable of doing. Unfortunately, it seems impossible to get in touch with him!?
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group