CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
ADC on a 16F676 .. what interrupt?!

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
curt



Joined: 23 Apr 2004
Posts: 4

View user's profile Send private message

ADC on a 16F676 .. what interrupt?!
PostPosted: Wed May 18, 2005 11:07 pm     Reply with quote
I'm not sure if I want the ADC to be interrupt driven or sleep() on convert, but either way the interrupt "must be enabled"

Groovy. Except nothing in the .h file looks like an A/D interrupt. what am I missing?

from 16f676.h:

Code:

// Constants used in ENABLE/DISABLE_INTERRUPTS() are:
#define GLOBAL                    0x0BC0
#define INT_RTCC                  0x0B20
#define INT_EXT                   0x0B10
#define INT_TIMER1                0x8C01
#define INT_TIMER0                0x0B20
#define INT_EEPROM                0x8C80
#define INT_COMP                  0x8C08
#define INT_RA                    0x0B08
#define INT_RA0                   0x010B08
#define INT_RA1                   0x020B08
#define INT_RA2                   0x040B08
#define INT_RA3                   0x080B08
#define INT_RA4                   0x100B08
#define INT_RA5                   0x200B08


-Curt[/code]
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Wed May 18, 2005 11:31 pm     Reply with quote
It's in 16F676.H for PCM vs. 3.224:
Quote:
// Constants used in ENABLE/DISABLE_INTERRUPTS() are:
#define GLOBAL 0x0BC0
#define INT_RTCC 0x0B20
#define INT_EXT 0x0B10
#define INT_AD 0x8C40
#define INT_TIMER1 0x8C01
#define INT_TIMER0 0x0B20
#define INT_EEPROM 0x8C80
#define INT_COMP 0x8C08
#define INT_RA 0x0B08
#define INT_RA0 0x010B08
#define INT_RA1 0x020B08
#define INT_RA2 0x040B08
#define INT_RA3 0x080B08
#define INT_RA4 0x100B08
#define INT_RA5 0x200B08
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group