CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
under treshold detect phase

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Guest
under treshold detect phase
PostPosted: Sat Feb 26, 2005 2:51 pm     Reply with quote
hi
i need your help
i want find phase sequance in three phase line voltaqe(rst are 380v)
but my sample voltage is under treshold voltage(1.8v) and i connect this voltage to AN0...AN2 pin
how can i find right direction of phase sequance????
please help me... Rolling Eyes

http://www.edaboard.com/ftopic109818.html
Mark



Joined: 07 Sep 2003
Posts: 2838
Location: Atlanta, GA

View user's profile Send private message Send e-mail

PostPosted: Sat Feb 26, 2005 11:08 pm     Reply with quote
Pick a phase and measure it until until it reaches 0V and start a timer. Now move to one of the other phases. Measure it until it reaches 0V and record the time. Now go back to the 1st one that you chose and do the same thing except pick the other phase. Which ever had the lesser time was the next in phase.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group