CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Using clock out as IO

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
ringo



Joined: 10 Feb 2004
Posts: 8

View user's profile Send private message

Using clock out as IO
PostPosted: Mon Jul 26, 2004 12:26 pm     Reply with quote
I have a pic16f628 and I'm setting it up as extclk and trying to use pin A6 as an output but the pin always stays low. Any idea what is happening here?
Thanks
Ringo
rnielsen



Joined: 23 Sep 2003
Posts: 852
Location: Utah

View user's profile Send private message

PostPosted: Mon Jul 26, 2004 12:49 pm     Reply with quote
Your configuration word might not be setup correctly. I've looked over the data sheet and am not sure if you can access it like a regular register. I use a Warp-13 programmer and the programming screen has an option to select which type of oscillator to use. One of the options, in the programmer screen, allows me to select 'EXTCLK with Port I/O' which tells me that the configuration word needs to be set up at programming time.

Ronald
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group