CCS :: View topic - ICD-U80 Serial monitor issue

CCS C Software and Maintenance Offers

FAQ

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

ICD-U80 Serial monitor issue

CCS Forum Index -> CCS ICD / Mach X / Load-n-Go

View previous topic :: View next topic

Author

Message

pet007

Joined: 25 Jan 2023
Posts: 21

ICD-U80 Serial monitor issue

Posted: Sun Apr 21, 2024 12:17 am

Reply with quote

Hi, please, how to setup Serial monitor to work with ICD-U80 ?
In my code is used pragma #use rs232(ICD), serial monitor start work after CCS Loader is finished, but there are messy output (like wrong baud rate?)

Code:

printf("SMT160 - DC=%3.2f, Temp=%3.2c C \n",SMT160.DC, SMT160.Temp);

Serial Monitor output:

Code:

qvp`m` }pn43l` = ` ` `\0A
160`-` }0n43l` =`` \0A
qvp`m =pn4sl }`` `\0A
160`-` }p.ts, = ` `\0A

There is choosen telnet port, baud rates tried various, no success, still messy output...
Thanks.
BTW. I have the latest ICD-U80 FW flashed already.

jeremiah

Joined: 20 Jul 2010
Posts: 1345

Posted: Tue Apr 23, 2024 8:25 am

Reply with quote

Your ICD stream should really at a minimum have DISABLE_INTS turned on:

Code:

#use rs232(ICD, DISABLE_INTS)

Start with that and see if that cleans it up. I just popped in a ICD-U80 with that line in a test program and it works out of the box. It pops up the SIOW program and starts printing stuff to the screen.

Display posts from previous:

	CCS Forum Index -> CCS ICD / Mach X / Load-n-Go	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group