CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
HID bootloader Joystick

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
vtrx



Joined: 11 Oct 2017
Posts: 142

View user's profile Send private message

HID bootloader Joystick
PostPosted: Wed Oct 23, 2019 2:47 pm     Reply with quote
Is it possible to program a HID device (joystick) and at the same time implement a Bootloader for firmware upgrade?
Ttelmah



Joined: 11 Mar 2010
Posts: 19499

View user's profile Send private message

PostPosted: Thu Oct 24, 2019 3:18 am     Reply with quote
Yes, and no.

Not 'at the same time'.
The chip is one device _after_ the other.
Boot and select bootloader mode. USB is programmed as the bootloader
device. Windows enumerates and uses this.
Then reboot, and run the main code for program as the HID device. Windows
sees and enumerates this.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group