CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Identifying variables used by a library function.

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
allenhuffman



Joined: 17 Jun 2019
Posts: 552
Location: Des Moines, Iowa, USA

View user's profile Send private message Visit poster's website

Identifying variables used by a library function.
PostPosted: Fri Aug 30, 2019 10:58 am     Reply with quote
Before I do this manually, does anyone know if there is an easy way to identify any global/static functions used by a library call? For example:

Code:
i2c_isr_state ();


To work around an issue we have encountered, I need to identify any variables being brought in by a library function so I can inspect the symbol table and see if any are int8s, and if they share memory with other variables.

Thanks... (I plan to manually use test code and just bring in a call, one by one, and look at the symbol table.)
_________________
Allen C. Huffman, Sub-Etha Software (est. 1990) http://www.subethasoftware.com
Embedded C, Arduino, MSP430, ESP8266/32, BASIC Stamp and PIC24 programmer.
http://www.whywouldyouwanttodothat.com ?
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Fri Aug 30, 2019 11:54 am     Reply with quote
Compile a program. Look at the .SYM file. Notice compiler-generated
variables:
Quote:
017 @INTERRUPT_AREA
018 @INTERRUPT_AREA
019 @I2C_STATE
01A ssp_isr.temp
F55 CCP_5
F55 CCP_5_LOW
F56

Also put the .LST file in Symbolic mode and see it:
Quote:
.................... #int_ssp
.................... void ssp_isr(void)
.................... {
.................... int8 temp;
....................
.................... temp = i2c_isr_state();
000AE: BTFSC SSP1STAT.ADDRESS
000B0: BRA 00B8
000B2: CLRF @I2C_STATE
000B4: BTFSC SSP1STAT.WRITE
000B6: BSF @I2C_STATE.7
000B8: MOVF @I2C_STATE,W
000BA: INCF @I2C_STATE,F
000BC: MOVWF temp
....................
000BE: BCF PIR1.SSP1IF
000C0: GOTO 0060
.................... }

Test program:
Code:
#include <18F46K22.h>
#fuses INTRC_IO, NOWDT, BROWNOUT, PUT, NOPBADEN
#use delay(clock=4M)
#use i2c(Slave, I2C1)

#int_ssp
void ssp_isr(void)
{
int8 temp;

temp = i2c_isr_state();

}

//======================================
void main()
{         

while(TRUE);
}
allenhuffman



Joined: 17 Jun 2019
Posts: 552
Location: Des Moines, Iowa, USA

View user's profile Send private message Visit poster's website

PostPosted: Fri Aug 30, 2019 1:51 pm     Reply with quote
PCM programmer wrote:
Compile a program. Look at the .SYM file. Notice compiler-generated
variables:


Thanks! Yep. That is my "manual" approach. I have been sticking in every library call I find in our ISRs in and looking at the results. So far, so good.

An OS company I worked for used to provide stub files for our libraries, allowing symbol table lookup and such without giving out the source code. I don't think that is very common, though.
_________________
Allen C. Huffman, Sub-Etha Software (est. 1990) http://www.subethasoftware.com
Embedded C, Arduino, MSP430, ESP8266/32, BASIC Stamp and PIC24 programmer.
http://www.whywouldyouwanttodothat.com ?
Ttelmah



Joined: 11 Mar 2010
Posts: 19499

View user's profile Send private message

PostPosted: Sun Sep 01, 2019 11:55 am     Reply with quote
Remember also that 90% of the values will actually just be held in
the scratch area, rather than in specific variables.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group