Clarification required on RTC programming

jaikumar · Joined: 15 Dec 2006 Posts: 109

Hi,

CCS compiler version: 5.078
PIC microcontroller: 16F18325

I have a i2c connected RTC and the weekday changes of the rtc chip are as follows:
01,02,04,08,10,20,40 in hex (Sun..Sat)

This code below does not work properly:

temtronic · Posted: Fri May 11, 2018 4:55 am

well I looked at my prelim version of the datasheet and no 'real time clock' peripheral...just DL the newest version and even Adobe can't find 'real time clock' in the new datasheet.
So I have to assume the PIC16F18325 does NOT have a RTC peripheral in it.

Jay

Ttelmah · Joined: 11 Mar 2010 Posts: 19496

He says he has an I2C RTC, but then doesn't tell us what it is. Makes it easy to help.... :(

We can't answer without that data.

His chip seems to return a single bit that moves along the register reflecting the day of the week. My guess would be that the code he is using to read the RTC, is performing a BCD to decimal conversion, hence the values internally have to be the decimal number not the hex he expects. Perhaps 75% of RTC chips return their internal registers in BCD, so this would make sense.

jaikumar · Joined: 15 Dec 2006 Posts: 109

Ttelmah you nailed it. The return value from the function did convert the value to BCD2BIN.

Thanks for pointing it out.

temtronic · Posted: Fri May 11, 2018 7:11 am

yeesh, my eyes got fixated on the blury green code, so it might be time for trifocals as I have to take the bifcals off to read the screen, on to read papers and look at PCBs... getting old has it's 'challenges'.