how to send address and Hexadecimal value use UART

[harizal]

how to convert this code from hi-Tech C to CCS C Compiler:
i use MP14A (multiPWM) connected to PIC16F877A.


This Coding from Hi-Tech to activate the MultiPWM use UART:

send_serial(0x01); // send channel of PWM to activate PWM1
send_serial(0x7f); //send PWM value.PWM value for PWM1 is 127
send_serial(0x02); // send channel of PWM to activate PWM2
send_serial(0xff); //send PWM value.PWM value for PWM1 is 255

When i code in CCS C compiler like this it not working at all:

printf("%X",0x01); // Channel PWM1
printf("%X",0xFF); //Value of PWM

[PCM programmer]

Use putc(). It should work. Example:

[Ttelmah]

It's perhaps worth explaining 'why'.

Putc sends the single character. putc(0x1); sends the binary character '1' on the serial.
printf("%X",0x01); // Channel PWM1
This sends the value 1, encoded as an ASCII character. So the binary value 0x31.