| View previous topic :: View next topic |
| Author |
Message |
bkamen
Joined: 07 Jan 2004
Posts: 1615
Location: Central Illinois, USA
|
| #INT_AD sample code |
 Posted: Wed Jan 07, 2004 10:34 am |
 |
|
Does anyone have any sample code for using AD interrupts?
I'm trying to get it working and it's like I have to read_adc() to gen the interrupt when I want the interrupt to tell me to read_adc()
What am I doing wrong? (I can post the code if anyone would like to see it.) |
|
 |
Ttelmah
Guest
|
| Re: #INT_AD sample code |
| Posted: Wed Jan 07, 2004 10:39 am |
|
|
| bkamen wrote: | Does anyone have any sample code for using AD interrupts?
I'm trying to get it working and it's like I have to read_adc() to gen the interrupt when I want the interrupt to tell me to read_adc()
What am I doing wrong? (I can post the code if anyone would like to see it.) |
There are some extra options for the adc function.
Basically, if you call 'read_adc(ADC_START_ONLY)', the compiler will trigger the ADC, and an interrupt will then be generated when the conversion is complete. Inside the interrupt handler, you can use 'read_adc(ADC_READ_ONLY)', to read the value, without triggering another conversion.
These variables are defined in the processor 'include' file. There is a third one 'ADC_START_AND_READ', with the comment that this is the 'default'.
Best Wishes |
|
|
Guest
|
|
| Posted: Wed Jan 07, 2004 2:39 pm |
|
|
| I'd like the interrupt to be self-stimulating. Hmmm... Let me play with those and see what I get. |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
