 |
 |
| View previous topic :: View next topic |
| Author |
Message |
benni
Joined: 28 Jun 2012
Posts: 28
|
| [How To] Create a own USB HID device |
 Posted: Sun Dec 30, 2012 8:12 am |
 |
|
Hello Community,
A few days ago I started to create my own USB device.
I also saw that much guys tried that also, maybe they got it working or not and because of this I want to release my C# and my PIC Project.
The C# program is not fully made by me, but I edited it and even got it working for my device.
The most important things in the PIC firmware:
Commands:
| Code: | //Commands
#define CMD_LED2_ON 0x80
#define CMD_STATE_LED2_ON 0x81 |
Check the incoming data for the Commands:
| Code: | //Get the Data
usb_get_packet(1,in_data,16);
//Write to the LCD that Data has been received
printf(lcd_putc,"\fReceived Data:\n");
//Check if the incoming byte equals the Command
if(in_data[0] == CMD_STATE_LED2_ON)
{
//Write to the LCD that command 0x81 has been executed
printf(lcd_putc,"LED2 is: %d", input(LED2));
//Check if LED is high
if(input(LED2))
{
//Set the output byte to 0x01 == true
out_data[0] = 0x01;
//Send data
usb_put_packet(1,out_data,16 USB_DTS_TOGGLE);
output_high(LED2);
}
else
{
//set the output byte to 0x00 == false
out_data[0] = 0x00;
//Send data
usb_put_packet(1,out_data,16 USB_DTS_TOGGLE);
}
}
else if(in_data[0] == CMD_LED2_ON)
{
//Toggle LED State
printf(lcd_putc,"Turn LED2 ON");
output_toggle(LED2);
}
|
The most important things in the C# Project
Execute a command:
| Code: | | public void RunCommand(Byte be) |
PID and VID:
| Code: | Int32 myProductID = Convert.ToInt32(0x0042);
Int32 myVendorID = Convert.ToInt32(0x04D8); |
Get data from the PIC for example: Read the LED state:
| Code: | if (!hidHandle.IsInvalid)
{
ReadCommand(0x81);
//Read the LED state
bool ledState = Convert.ToBoolean(m_Result);
if (ledState == true) this.ledStateLabel.Text = "LED is on";
else this.ledStateLabel.Text = "LED is off";
}
|
Here are the Downloads, hosted on my server:
Firmware:
Firmware
C# Program
C# Program
Schematic (The LCD is just for Debugging, the Schematic does not contain a schematic how to wire it.
Easy Schematic
Example Picture (You see there much more than it's needed. I use this Board also for an ADC Reader)
Example Picture
I hope it helps to understand it and getting it working for you too and I hope that someone moderator will make it sticky.
Leave a comment please 
Regards Benni
Last edited by benni on Thu Oct 03, 2013 6:10 am; edited 1 time in total |
|
 |
rakkoc
Joined: 05 Apr 2012
Posts: 1
|
|
| Posted: Mon Aug 12, 2013 9:31 am |
|
|
| Links are broken, can you upload again ? |
|
|
benni
Joined: 28 Jun 2012
Posts: 28
|
|
| Posted: Thu Oct 03, 2013 6:12 am |
|
|
Hey,
Links are updated.
Regards Benni |
|
|
ze.vana
Joined: 11 Jun 2011
Posts: 15
|
|
| Posted: Sat Mar 08, 2014 5:22 am |
|
|
| benni wrote: | Hey,
Links are updated.
Regards Benni |
you are right I'm the one who is having a lot of difficulty starting on usb hid devices
I have started in visual c# 2008 last year, and now c# 2010. I've already made many C# projects
communication with PIC4550,2550 usb->PC, but using C# serial Port, I wanna do it using HID.
But As the guy said "THE LINKS ARE BROKEN". Could you please send me it by email:
[email protected] , I have an account in www.4shared.com, if you have too, you can put the your links there. |
|
|
pieter
Joined: 16 Jan 2011
Posts: 27
|
| information |
| Posted: Fri Mar 14, 2014 12:12 am |
|
|
Hi Benni, can you please post your downloads on the forum?
Thanks! |
|
|
sohar
Joined: 14 Aug 2014
Posts: 1
|
|
| Posted: Thu Aug 14, 2014 11:44 pm |
|
|
Note: CCS defaults to software i2c, unless you use the
hardware i2c pins and add the FORCE_HW parameter to the #use i2c()
statement.
_________________
####### Abdul Rehman ######## |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
