CCS :: View topic - PIC24F EEProm Read Write

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

PIC24F EEProm Read Write

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

vino182k6

Joined: 27 Jun 2012
Posts: 6

PIC24F EEProm Read Write

Posted: Thu Aug 16, 2012 2:22 am

Hi all

I am working on PIC24F MCU for the last few weeks.

CCS C Compiler Version: 4.130
MCU : PIC24F32KA304

Code:

#include <24F32KA304.h>
#device ICD=TRUE

#FUSES WPOSTS1    //Watch Dog Timer PostScalar 1:1
#FUSES FRC    //Internal Fast RC Oscillator
#FUSES NOIESO //Internal External Switch Over mode disabled
#FUSES NOCKSFSM          //Clock Switching is disabled, fail Safe clock monitor is disabled
#FUSES NOWINDIS //Watch Dog Timer in Window mode
#FUSES WDT_NOSL //Watch Dog Timer, disabled during SLEEP
#FUSES NOBROWNOUT //No brownout reset
#FUSES NOPUT    //No Power Up Timer
#FUSES DEBUG    //Debug mode for use with ICD
#FUSES ICSP3    //ICD uses PGC3/PGD3 pins
#FUSES NODSBOR    //BOR disabled in Deep Sleep
#FUSES NODSWDT    //Deep Sleep Watchdog Timer disabled

#use delay(clock=8000000)

I can't get any sample code in CCS C for DATA EEPROM reading through PSV.

Can anyone can help me to figure out the sequence for reading EEprom through PSV.

Thanks in advance.

Vinoth

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum