USB Interfacing with PIC 18F452

[[email protected]]

I have read many forum i found that there is no compatibility of USB with PIC 18F452
but when i see example program there is some awesome thing or this my mis_interpretation that PIC 18f452 support USB protocol but there is no D+ & D- PIN in PIC 18F452

[Ttelmah]

Note the line:
"//use the National USBN960x peripheral"

This is the 452, talking to USB, _with a separate interface chip_.

Also, remove the code you have posted, since you are in breach of the copyright:

"No other use, reproduction or distribution is permitted without written permission."

You can simply refer _to _ the library by name here, since everybody already has the compiler files if they own the compiler. Posting the files though is _illegal_.

Best Wishes

[[email protected]]

Thanks for Correction