| View previous topic :: View next topic |
| Author |
Message |
ljbeng
Joined: 10 Feb 2004
Posts: 205
|
| How to debug chip with 2 uarts |
 Posted: Mon Nov 22, 2010 2:35 pm |
 |
|
I needed an 18F part that had both 2 Uarts and EEPROM. The 18Fk22 fit this criteria. The 2nd Uart, however, is the same 2 pins, RB6, RB7 that are used for the CCS ICD. How does one go about using this chip and debugging the code? I looked at an 18F25J11 and it has 2 uarts, remappable pins but no EEPROM.
Can I use the 18F25J11 and use program space as "EEPROM" storage for user selectable values?
Thanks. |
|
 |
bkamen
Joined: 07 Jan 2004
Posts: 1615
Location: Central Illinois, USA
|
| Re: How to debug chip with 2 uarts |
| Posted: Mon Nov 22, 2010 3:53 pm |
|
|
| ljbeng wrote: |
Can I use the 18F25J11 and use program space as "EEPROM" storage for user selectable values?
|
yes!
I just did this with a 26J11 project I finished last week.
The reason why a lot of "self programmable" PIC's no longer come with EEPROM is because they can use program flash for application config storage! (at least that's my guess)
-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D |
|
|
dyeatman
Joined: 06 Sep 2003
Posts: 1933
Location: Norman, OK
|
|
| Posted: Mon Nov 22, 2010 3:53 pm |
|
|
For the 18F4XK22 series the 2nd UART is on pins D6/D7....
_________________
Google and Forum Search are some of your best tools!!!! |
|
|
|
FAQ 
Search
Register
Profile 
Log in to check your private messages 
Log in
