CCS :: View topic - Pic18f4520 Timer1 doesn't work with external clock!

CCS C Software and Maintenance Offers

FAQ

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

Pic18f4520 Timer1 doesn't work with external clock!

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

cchappyboy

Joined: 03 Dec 2008
Posts: 45

Pic18f4520 Timer1 doesn't work with external clock!

Posted: Tue Jun 22, 2010 4:00 pm

Reply with quote

I used PIC18f4520 and want to make a Real time clock using external clock. That is a 32.768K crystal sit on the pin 15 and pin 16.
The configuration for timer1 is like this

Code:

setup_timer_1(t1_external);
set_timer1(0x00);//around 1s
enable_interrupts(int_timer1);
enable_interrupts(global);

but it doesn't work. Because I monitored Timer1 register, use get_timer1(); it always =0.

Then I try another way to use internal clock.

Code:

setup_timer_1(t1_internal);
set_timer1(0xbdb);//62.5ms
enable_interrupts(int_timer1);
enable_interrupts(global);

It works.

Do you know what is the problem when I setup to external clock?
Thanks for your response.

PCM programmer

Joined: 06 Sep 2003
Posts: 21708


Posted: Tue Jun 22, 2010 4:27 pm

This post shows how to setup Timer1 to use an external 32.768 KHz crystal: http://www.ccsinfo.com/forum/viewtopic.php?t=25824&start=7

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group