CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
PIC24 hardware issue

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
salmankhalid16



Joined: 18 Dec 2009
Posts: 27

View user's profile Send private message Send e-mail

PIC24 hardware issue
PostPosted: Mon Apr 12, 2010 9:48 am     Reply with quote
hi all

I made a hardware to use the PIC24fj256gb110 microcontroller..
but I am getting problems in programming it...

When I try to communicate with MPLAB ICD2 DEBUGGER through 6 pin RJ45 cable, it says
"unable to detect target device. target may not be powered up"

The connections are as follow of RJ45 are as follow
Quote:

pin 1 of rj45 to MCLR
pin 2 of rj45 to 1uF cap and VCC
pin3 is ground
pin4 of RJ45 to RB7
pin5 of RJ45 to RB6

I am trying to run port A as digital out, Uart 1 and SPI 1.
I have kept programming connections same as given in explorer 16 datasheet schematics.

The software I am using is MPLAB IDE v 8.10.
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Mon Apr 12, 2010 11:53 am     Reply with quote
This problem doesn't really involve the compiler. It's an ICD2 issue.
You should ask about it in the Microchip ICD2 forum:
http://www.microchip.com/forums/tt.aspx?forumid=49
FvM



Joined: 27 Aug 2008
Posts: 2337
Location: Germany

View user's profile Send private message

PostPosted: Mon Apr 12, 2010 12:36 pm     Reply with quote
May be you confused the RJ45 connections. Some modular cables are straight (1:1) others are 180° twisted.
There are no basic issues involved with ICD2 programming of PIC24F, as far as I'm aware of.
bkamen



Joined: 07 Jan 2004
Posts: 1615
Location: Central Illinois, USA

View user's profile Send private message

PostPosted: Tue Apr 13, 2010 11:54 pm     Reply with quote
no, just recently did a project with a PIC24... they work.

Double check those connections on the ICD -> PIC.

There's a sample circuit for interfacing with guidelines in the ICD2 help file in MPLAB.

-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group