View previous topic :: View next topic |
Author |
Message |
TimB
Joined: 29 Aug 2008 Posts: 4
|
USB 2.2 and the 14k50 |
Posted: Fri Aug 29, 2008 12:21 pm |
|
|
Just a quick question.
Does CCS currently support the Pic18f14k50 with the new 2.2 usb drivers?
Thanks in advance |
|
|
PCM programmer
Joined: 06 Sep 2003 Posts: 21708
|
|
Posted: Fri Aug 29, 2008 2:27 pm |
|
|
If I do a "dir 18F??K*.*" on the Devices directory for PCH vs. 4.078,
this is what I get:
Quote: |
18F23K20.H 15,380 08-20-08 12:07p
18F24K20.H 15,380 08-20-08 12:07p
18F25K20.H 15,382 08-20-08 12:07p
18F26K20.H 15,383 08-20-08 12:07p
18F43K20.H 16,075 08-20-08 12:07p
18F44K20.H 16,075 08-20-08 12:07p
18F45K20.H 16,077 08-20-08 12:07p
18F46K20.H 15,994 08-20-08 12:07p
|
When you say "support", if you mean do they have USB drivers and
examples for those chips, then all I can say is, when I did a dir
on the drivers and Examples directories, all the USB files were
dated 2007 at the latest.
support the USB modules in those PICs,
I don't know. |
|
|
TimB
Joined: 29 Aug 2008 Posts: 4
|
|
Posted: Fri Aug 29, 2008 5:41 pm |
|
|
Ok thanks for looking and answering |
|
|
TimB
Joined: 29 Aug 2008 Posts: 4
|
|
Posted: Mon Jan 26, 2009 9:38 am |
|
|
Has there been any update on this?
Is USB supported on this device now?
Thanks |
|
|
dyeatman
Joined: 06 Sep 2003 Posts: 1933 Location: Norman, OK
|
|
|
TimB
Joined: 29 Aug 2008 Posts: 4
|
|
Posted: Mon Jan 26, 2009 4:45 pm |
|
|
Thanks, I had seen that but that list says they have not yet tested it and considering the 14k50 does not work on the 1.3 firmware unless they have tested and proved it which they would have to when they implemented the latest firmware (now 2.3) I not spending any money on the compiler.
Thanks again for your time. |
|
|
|