CCS :: View topic - 16F88 and ADC

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

16F88 and ADC

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

nuno12345

Joined: 16 Jul 2008
Posts: 50

16F88 and ADC

Posted: Thu Aug 07, 2008 6:14 pm

Hi again, im trying to use the ADC of 16F88...
If I connect (completly turn my POT) to the "positive side" it reads well...
But if I decrease the POT strange characters start apearing :/

CODE:

Code:

#include <16F88.h>
#device adc=10

#fuses INTRC_IO, NOWDT, NOBROWNOUT, PUT, NOMCLR
#use delay(clock=4000000)

#include "flex_lcd.c"

long int q;
float p;
void main()
{

setup_adc( ADC_CLOCK_DIV_64 );
setup_adc_ports(sAN0);
set_adc_channel( 0 ); // AN0

lcd_init();
while(1)
{
q = read_adc();
p = 5.0 * q / 1024.0;
printf(lcd_putc, "\fADC = %4ld\nVoltage = %01.2fV", q, p);
delay_ms(200);
}
}

Connections:
#define LCD_DB4 PIN_B4
#define LCD_DB5 PIN_B5
#define LCD_DB6 PIN_B6
#define LCD_DB7 PIN_B7

#define LCD_RS PIN_B1
#define LCD_RW PIN_B2
#define LCD_E PIN_B3
//#define USE_LCD_RW 1

CCS Version: 4.074
JDM Programmer

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum