Building with Jenkins

ironwill99 · Joined: 03 Dec 2018 Posts: 2

We are trying to use Jenkins to automate the build process. I think Jenkins is getting stuck because of the compiler's status window. The compile process never completes. Has anyone used CCS with Jenkins and if so what command line switches did you use?

Here is the command I use.

start /b /wait "C:\Program Files (x86)\PICC\Ccsc.exe" +FH "main.c" +LN +T +A +M +Z +Y=9 +EA #__18F46K22=TRUE

Thanks!

Ttelmah · Joined: 11 Mar 2010 Posts: 19496

On other tools, you need +PE.
That makes the status window only appear if there are errors.

ironwill99 · Joined: 03 Dec 2018 Posts: 2

Ttelmah · Joined: 11 Mar 2010 Posts: 19496

+P01 will make it appear just for one second errors or not.

Normally even when using a build tool, it is useful to actually see errors.

However if +PN didn't fix it, suggests there is an error. Remember the compiler needs write permission to the directory where your file to be compiled is stored, and to where it's temporary files are. You may need to change the compatibility settings to the compiler to 'run as administrator'.