CCS :: View topic - PIC16F1939

CCS C Software and Maintenance Offers

FAQ

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

PIC16F1939

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

georpo

Joined: 18 Nov 2008
Posts: 281
Location: Athens, Greece.

PIC16F1939

Posted: Sat Sep 29, 2018 10:51 am

Reply with quote

Hello,

I am using a PIC16F1939 and command:

Code:

set_tris_a (0b00111001);

gives this in disassembly listing:

Code:

set_tris_a (0b00111001);
0003 3039 MOVLW 0x39
0004 0065 TRIS 0x5

Register TRISA is at address 0x08C and not 0x05.

Am I missing sometjing here?

Thanks!
_________________
George.

Ttelmah

Joined: 11 Mar 2010
Posts: 19499

Posted: Sat Sep 29, 2018 12:45 pm

Reply with quote

Look up the TRIS command in the data sheet. It is not the same as a standard move.

Quote:

When ‘f’ = 5, TRISA is loaded.
When ‘f’ = 6, TRISB is loaded.
When ‘f’ = 7, TRISC is loaded.

From the data sheet entry for this command.

georpo

Joined: 18 Nov 2008
Posts: 281
Location: Athens, Greece.


Posted: Sat Sep 29, 2018 12:51 pm

Thanks for that! _________________ George.

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group