CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
shift right/left using Flex_LCD420.c

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
art



Joined: 21 May 2015
Posts: 181

View user's profile Send private message

shift right/left using Flex_LCD420.c
PostPosted: Mon Mar 12, 2018 2:28 am     Reply with quote
Hi,

I would like to shift right/left "Hello to the world" using Flex_LCD420.c .
However, it will display the same thing in line 1 and line 3 while line 2 will be same with line 4. I just want it to display in line 1 and 2 only.

What is wrong with below code ? Please help me.

Code:


#include <18F4550.H>
#fuses XT, NOWDT, NOPROTECT, BROWNOUT, PUT, NOLVP
#use delay(clock=4000000)

#include "Flex_LCD420.c "

void lcd_scroll_right(void)
{
lcd_send_byte(0, 0x1E);
}


void lcd_scroll_left(void)
{
lcd_send_byte(0, 0x18);
}
   

void main()
{
int8 i;

lcd_init();

lcd_putc("\f");  // Clear the LCD
delay_ms(100);   


lcd_putc("Hello to the        Side scrolling      \n");
lcd_putc("world.              demo.               ");

delay_ms(1000);

while(1)
  {
   for(i = 0; i < 20; i++)
      {
       lcd_scroll_left();
       delay_ms(200); 
      }

   delay_ms(2000); 
  }

}
temtronic



Joined: 01 Jul 2010
Posts: 9221
Location: Greensville,Ontario

View user's profile Send private message

PostPosted: Mon Mar 12, 2018 4:51 am     Reply with quote
You need to look at your LCD module's datasheet and see the 'memory map' for the addresses of the 'data display RAM' to see why it is happening.
You should see that line 3 is after line 1 and that the '21st' character of line 3 'wraps' around to line 1, character 1. The same operation happens with line 4 and 2.
Your scrolling function needs to have limits set in it. What I've done in the past is have a 2nd 'display buffer' of 20 bytes long. I scrolled the data within THAT buffer, then simply sent the buffer to the LCD. This doesn't use the LCD internal command of 'shift', you're in control.
You may find 'scrolling' code here (just try the 'search' button up top), if not Goggle will, something like 'LCD module scrolling' should limit the hits to less than a million...

Jay
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group