CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
debugging 16bit devices with ICD3 in CCS's own IDE

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
bennyboos



Joined: 17 Nov 2005
Posts: 30
Location: Chester UK

View user's profile Send private message

debugging 16bit devices with ICD3 in CCS's own IDE
PostPosted: Fri Feb 20, 2015 6:59 am     Reply with quote
Hi everyone.
Can any of you confirm whether you are able to use an ICD3 from within CCS's own IDE to program/debug 16bit devices - in particular a dsPIC30F3013?
I have tried the diagnostics and whilst it can read the device ID and the voltages, that seems to be about all it can do? Everything else such as erase/program/etc is met with an error.
I'm pretty certain the hardware is all OK as it seems to work OK from within MPLAB_8.9
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group