How to use multi dimentional array

[Gerrit]

Can some one help,

I have the next structure and array. What ways can I use to copy an element of Modulo_Index to the Structure Red_Modulo.


char const Modulo_Index[3][4] =
{{0x00, 0x00, 0x00, 0x00},
{0x00, 0x01, 0x00, 0x00},
{0x01, 0x00, 0x01, 0x00}};

typedef struct {
char First;
char Second;
char Thirdth;
char Fourth;
}RGB_Modulo;


RGB_Modulo Red_Modulo;
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514597

[PCM programmer]

:=Can some one help,
:=
:=I have the next structure and array. What ways can I use to copy an element of Modulo_Index to the Structure Red_Modulo.
:=
:=
:=char const Modulo_Index[3][4] =
:= {{0x00, 0x00, 0x00, 0x00},
:= {0x00, 0x01, 0x00, 0x00},
:= {0x01, 0x00, 0x01, 0x00}};
:=
:=typedef struct {
:= char First;
:= char Second;
:= char Third;
:= char Fourth;
:= }RGB_Modulo;
:=
:=
:=RGB_Modulo Red_Modulo;

-----------------------------------------------

Red_Modulo.First = Modulo_Index[0][0];
Red_Modulo.Second = Modulo_Index[0][1];
Red_Modulo.Third = Modulo_Index[0][2];
Red_Modulo.Fourth = Modulo_Index[0][3];
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514600

[R.J.Hamlett]

:=Can some one help,
:=
:=I have the next structure and array. What ways can I use to copy an element of Modulo_Index to the Structure Red_Modulo.
:=
:=
:=char const Modulo_Index[3][4] =
:= {{0x00, 0x00, 0x00, 0x00},
:= {0x00, 0x01, 0x00, 0x00},
:= {0x01, 0x00, 0x01, 0x00}};
:=
:=typedef struct {
:= char First;
:= char Second;
:= char Thirdth;
:= char Fourth;
:= }RGB_Modulo;
:=
:=
:=RGB_Modulo Red_Modulo;
This line makes no sense. If you want to use 'RGB_Modulo', as a new 'type', you will need to use a typedef.

RGB_Modulo.First=Modulo_Index[0][0];

This will copy the first element in the array, into the first entry in the structure.

Best Wishes
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514601

[Gerrit]

Hello PCM programmer,

What you sugested I have tested and that works.

What I want to know is if I can use a single element from
Modulo_Index[x] to palce in the structur Red_Modulo (all four
value's)


CCS if giving no error or warning on this

Red_Modulo = Modulo_Index[x];

What am I doing here? cant figger it out.


Regards,

Gerrit



:=:=Can some one help,
:=:=
:=:=I have the next structure and array. What ways can I use to copy an element of Modulo_Index to the Structure Red_Modulo.
:=:=
:=:=
:=:=char const Modulo_Index[3][4] =
:=:= {{0x00, 0x00, 0x00, 0x00},
:=:= {0x00, 0x01, 0x00, 0x00},
:=:= {0x01, 0x00, 0x01, 0x00}};
:=:=
:=:=typedef struct {
:=:= char First;
:=:= char Second;
:=:= char Third;
:=:= char Fourth;
:=:= }RGB_Modulo;
:=:=
:=:=
:=:=RGB_Modulo Red_Modulo;
:=
:=-----------------------------------------------
:=
:=Red_Modulo.First = Modulo_Index[0][0];
:=Red_Modulo.Second = Modulo_Index[0][1];
:=Red_Modulo.Third = Modulo_Index[0][2];
:=Red_Modulo.Fourth = Modulo_Index[0][3];
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514602

[Gerrit]

Hello PCM programmer,

What you sugested I have tested and that works.

What I want to know is if I can use a single element from
Modulo_Index[x] to palce in the structur Red_Modulo (all four
value's)


CCS if giving no error or warning on this

Red_Modulo = Modulo_Index[x];

What am I doing here? cant figger it out.


Regards,

Gerrit



:=:=Can some one help,
:=:=
:=:=I have the next structure and array. What ways can I use to copy an element of Modulo_Index to the Structure Red_Modulo.
:=:=
:=:=
:=:=char const Modulo_Index[3][4] =
:=:= {{0x00, 0x00, 0x00, 0x00},
:=:= {0x00, 0x01, 0x00, 0x00},
:=:= {0x01, 0x00, 0x01, 0x00}};
:=:=
:=:=typedef struct {
:=:= char First;
:=:= char Second;
:=:= char Third;
:=:= char Fourth;
:=:= }RGB_Modulo;
:=:=
:=:=
:=:=RGB_Modulo Red_Modulo;
:=
:=-----------------------------------------------
:=
:=Red_Modulo.First = Modulo_Index[0][0];
:=Red_Modulo.Second = Modulo_Index[0][1];
:=Red_Modulo.Third = Modulo_Index[0][2];
:=Red_Modulo.Fourth = Modulo_Index[0][3];
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514603

[PCM programmer]

:=What you sugested I have tested and that works.
:=
:=What I want to know is if I can use a single element from
:=Modulo_Index[x] to palce in the structur Red_Modulo (all four
:=value's)
:=
:=CCS if giving no error or warning on this
:=
:= Red_Modulo = Modulo_Index[x];
:=
----------------------------------------------------
It gives me an error. It says "Bad expression syntax".
That's with PCM vs. 3.148.

Modulo_Index is defined as a two-dimensional array,
but you're trying to use it as a one-dimensional array.
So that's why it gives the error.

What's wrong with using the method of copying the bytes
that I posted ? Are you looking for a method that
only takes one line of C code, or is there some other reason ?
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514606

[Gerrit]

No not pritacarly looking for a one line command
but, what I'm doing wrong or why CCS is not
reporting an error.
It has taken me a lot of time testing today And I could not explain what I was doing wrong.

The line I used copied 3 variables to the structure. I'am
using Version 3.152, 18034.


I will modify my software tomorrow at work.


Thanks for the response


reagrds,


Gerrit

:=:=What you sugested I have tested and that works.
:=:=
:=:=What I want to know is if I can use a single element from
:=:=Modulo_Index[x] to palce in the structur Red_Modulo (all four
:=:=value's)
:=:=
:=:=CCS if giving no error or warning on this
:=:=
:=:= Red_Modulo = Modulo_Index[x];
:=:=
:=----------------------------------------------------
:=It gives me an error. It says "Bad expression syntax".
:=That's with PCM vs. 3.148.
:=
:=Modulo_Index is defined as a two-dimensional array,
:=but you're trying to use it as a one-dimensional array.
:=So that's why it gives the error.
:=
:=What's wrong with using the method of copying the bytes
:=that I posted ? Are you looking for a method that
:=only takes one line of C code, or is there some other reason ?
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514608

[PCM programmer]

:=No not pritacarly looking for a one line command
:=but, what I'm doing wrong or why CCS is not
:=reporting an error.
:=It has taken me a lot of time testing today And I could not explain what I was doing wrong.
:=
:=The line I used copied 3 variables to the structure. I'am
:=using Version 3.152.
----------------------------------------------------

I installed PCM vs. 3.152 and it gave me an error message:
"Bad expression syntax".

But 3.152 has got some serious problems. For example, it
will not give an error if you're missing a closing brace.
I just did a test right now. I removed the closing brace
from main(). It didn't complain at all.

I would switch to either vs. 3.148 or 3.158, if you're able to.
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514609

[Woody]

<font face="Courier New" size=-1>In order to assign values to the whole structure in one go you will need to change your array to an array of structures, rather than a two dimensional array. ( Unless it needs to be a two dimensional array for some other reason. )

#include <16f876.h>

typedef struct {
char First;
char Second;
char Third;
char Fourth;
} RGB_Modulo;

const RGB_Modulo Modulo_Index [3] = {
{0x00, 0x00, 0x00, 0x00},
{0x00, 0x01, 0x00, 0x00},
{0x01, 0x00, 0x01, 0x00}
};

RGB_Modulo Red_Modulo;

void main (void)
{
Red_Modulo = Modulo_Index [1];
}</font>
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514625

[Gerrit]

Hello woody,

This is what I was looking for.

I'm already correcting the arrays.


Thanks for the example

Regards,

Gerrit


:=In order to assign values to the whole structure in one go you will need to your array to an array of structures, rather than a two dimensional array. ( Unless it needs to be a two dimensional array for some other reason. )
:=
:=#include <16f876.h>
:=
:=typedef struct {
:= char First;
:= char Second;
:= char Third;
:= char Fourth;
:=} RGB_Modulo;
:=
:=const RGB_Modulo Modulo_Index [3] = {
:= {0x00, 0x00, 0x00, 0x00},
:= {0x00, 0x01, 0x00, 0x00},
:= {0x01, 0x00, 0x01, 0x00}
:=};
:=
:=RGB_Modulo Red_Modulo;
:=
:=void main (void)
:={
:= Red_Modulo = Modulo_Index [1];
:=}
___________________________
This message was ported from CCS's old forum
Original Post ID: 144514628