CCS :: View topic - PIC24F Development Kit - Issue with "#device ICD=TRUE&q

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

PIC24F Development Kit - Issue with "#device ICD=TRUE&q

CCS Forum Index -> CCS ICD / Mach X / Load-n-Go

View previous topic :: View next topic

Author

Message

nsunshine

Joined: 17 Aug 2011
Posts: 1

PIC24F Development Kit - Issue with "#device ICD=TRUE&q

Posted: Wed Aug 17, 2011 9:26 am

I wanted to share a helpful response I received from CCS in response to an issue I was having. I just got started with the PIC24F Development Kit and I was getting "Verification Failure" when trying to load the simple green led flashing program in the Exercise book.

It turns out that the line

Code:

#device ICD=TRUE

was the culprit. Commenting out this line and manually loading the hex file resulted in a program that worked correctly. However, this did not allow me to use the IDE's debugger.

I contacted CCS, and they told me to use the line

Code:

#device ICD=2

instead. The reasons is that #device ICD=TRUE is a macro that equates to

Code:

#device ICD=1

CCS stated that newer versions of the compiler (I have 4.124) have added new functionality to choose the pair of ICSP pins to use for debugging based on the number after "ICD=".

After making this correction everything worked perfectly. Not sure if this problem has been seen already, but I figured I would post the solution for everyone's benefit.

Display posts from previous:

	CCS Forum Index -> CCS ICD / Mach X / Load-n-Go	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum