Microchip Stack for the ZigBee™ Protocol

omkarmali1984 · Joined: 16 Jul 2010 Posts: 1

Hi....
Please.......... anybody can let know me that .....
Does CCS compiler support Zigbee stack source code from Microchip ?
Can anybody post simple code example based on Microchip Stack for the ZigBee™ Protocol ?
I have to use a PIC and Zigbee stack from Microchip, connect the sensor to the ADC, then I have to transmit wireless signal to the host PC.
Please help me.

HGHK · Joined: 29 Jun 2010 Posts: 33

I need to this too. I think we must write a framework for it.

bkamen · Posted: Tue Oct 05, 2010 1:12 pm

Microchip's software is typically written and supported for their Cxx products.

(you know this I'm sure)

Normally, there is syntax that is different than CCS. (welcome to microcontroller land)

C18/C30/C32 also tends to lack some of the pre-written functions that CCS has written for you (and optimized).

So out of the box, the answer is "no".

But that doesn't mean that with some work, it couldn't be converted.

Cheers,

-Ben
_________________
Dazed and confused? I don't think so. Just "plain lost" will do. :D

HGHK · Joined: 29 Jun 2010 Posts: 33

Use PIC16LF877A Or PIC18F452 Pleas becaus it is simple
we like to use extra low power devices if it posible.
thanks for help

bkamen · Posted: Tue Oct 05, 2010 2:03 pm