CCS :: View topic - Disabling peripherals on PIC24FJ256GB110 [resource]

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

Disabling peripherals on PIC24FJ256GB110 [resource]

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

Oli
Guest

Disabling peripherals on PIC24FJ256GB110 [resource]

Posted: Tue Feb 23, 2010 8:29 am

Hi All

Because of my power critical application, I have to disable everything that isn't necessary. Defining all of the stop in idle mode bits and module enable bits took some time, so I've posted them here if it helps anybody else out.

Code:

/******************* STOP IN IDLE MODE BITS (SIDL), MODULE ENABLE BITS ****************************/

// timers
#word T1CON = 0x0104 // timer 1
#bit T1SIDL = T1CON.13
#word T2CON = 0x0110 // timer 2
#bit T2SIDL = T2CON.13
#word T3CON = 0x0112 // timer 3
#bit T3SIDL = T3CON.13
#word T4CON = 0x011E // timer 4
#bit T4SIDL = T4CON.13
#word T5CON = 0x0120 // timer 5
#bit T5SIDL = T5CON.13

// input capture
#word IC1CON1 = 0x140 // input capture 1
#bit IC1SIDL = IC1CON1.13
#word IC2CON1 = 0x148 // input capture 2
#bit IC2SIDL = IC2CON1.13
#word IC3CON1 = 0x150 // input capture 3
#bit IC3SIDL = IC3CON1.13
#word IC4CON1 = 0x158 // input capture 4
#bit IC4SIDL = IC4CON1.13
#word IC5CON1 = 0x160 // input capture 5
#bit IC5SIDL = IC5CON1.13
#word IC6CON1 = 0x168 // input capture 6
#bit IC6SIDL = IC6CON1.13
#word IC7CON1 = 0x170 // input capture 7
#bit IC7SIDL = IC7CON1.13
#word IC8CON1 = 0x178 // input capture 8
#bit IC8SIDL = IC8CON1.13
#word IC9CON1 = 0x180 // input capture 9
#bit IC9SIDL = IC9CON1.13

// output compare
#word OC1CON1 = 0x0190 // output capture 1
#bit OC1SIDL = OC1CON1.13
#word OC2CON1 = 0x019A // output capture 2
#bit OC2SIDL = OC2CON1.13
#word OC3CON1 = 0x01A4 // output capture 3
#bit OC3SIDL = OC3CON1.13
#word OC4CON1 = 0x01AE // output capture 4
#bit OC4SIDL = OC4CON1.13
#word OC5CON1 = 0x01B8 // output capture 5
#bit OC5SIDL = OC5CON1.13
#word OC6CON1 = 0x01C2 // output capture 6
#bit OC6SIDL = OC6CON1.13
#word OC7CON1 = 0x01CC // output capture 7
#bit OC7SIDL = OC7CON1.13
#word OC8CON1 = 0x01D6 // output capture 8
#bit OC8SIDL = OC8CON1.13
#word OC9CON1 = 0x01E0 // output capture 9
#bit OC9SIDL = OC9CON1.13

// i2c

#word O2C1CON = 0x0206 // i2c 1
#bit I2C1SIDL = O2C1CON.13
#bit I2C1EN = O2C1CON.15

#word O2C2CON = 0x0216 // i2c 2
#bit I2C2SIDL = O2C2CON.13
#bit I2C2EN = O2C2CON.15

#word O2C3CON = 0x0276 // i2c 3
#bit I2C3SIDL = O2C3CON.13
#bit I2C3EN = O2C3CON.15

// UART

#word U1MODE = 0x0220 // UART 1;
#bit U1SIDL = U1MODE.13
#bit UART1EN = U1MODE.15

#word U2MODE = 0x0230 // UART 2;
#bit U2SIDL = U2MODE.13
#bit UART2EN = U2MODE.15

#word U3MODE = 0x0250 // UART 3;
#bit U3SIDL = U3MODE.13
#bit UART3EN = U3MODE.15

#word U4MODE = 0x02B0 // UART 4;
#bit U4SIDL = U4MODE.13
#bit UART4EN = U4MODE.15

// SPI

#word SPI1STAT = 0x0240 // SPI 1
#bit SPI1SIDL = SPI1STAT.13
#bit SPI1EN = SPI1STAT.15

#word SPI2STAT = 0x0260 // SPI 2
#bit SPI2SIDL = SPI2STAT.13
#bit SPI2EN = SPI2STAT.15

#word SPI3STAT = 0x0280 // SPI 3
#bit SPI3SIDL = SPI3STAT.13
#bit SPI3EN = SPI3STAT.15

// A/D

#word AD1CON1 = 0x0320 // A/D
#bit AD1SIDL = AD1CON1.13

// CTMU

#word CTMUCON = 0x033C
#bit CTMUSIDL = CTMUCON.13
#bit CTMUEN = CTMUCON.15

// USB

#word U1OTGCON = 0x0486 // USB on the go reg
#bit OTGEN = U1OTGCON.2 // enable bit for OTG
#bit DPPULUP = U1OTGCON.7 // pull ups on USB

#word U1PWRC = 0x0488
#bit USBPWR = U1PWRC.0

#word U1CON = 0x0494
#bit USBEN = U1CON.0
#bit HOSTEN = U1CON.3

#word U1CNFG1 = 0x04A6
#bit USBSIDL = U1CNFG1.13

#word U1PWMCON = 0x04CE
#bit PWMEN = U1PWMCON.15

// parallel master / slave port

#word PMCON = 0x0600
#bit PSIDL = PMCON.13
#bit PMPEN = PMCON.15

// CRC

#word CRCCON = 0x0640
#bit CSIDL = CRCCON.13

/******************************************************************************/

/*********************** PMD / MODULE DISABLE BITS ****************************/

#word PMD1 = 0x0770
#word PMD2 = 0x0772
#word PMD3 = 0x0774
#word PMD4 = 0x0776
#word PMD5 = 0x0778
#word PMD6 = 0x077A

/******************************************************************************/

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum