CCS :: View topic - 74hc595 4 Digit 38mm C Driver !

FAQ

Forum Help

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

74hc595 4 Digit 38mm C Driver !

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

yakuzaistanbul

Joined: 04 Jan 2010
Posts: 2

74hc595 4 Digit 38mm C Driver !
Posted: Mon Jan 04, 2010 2:23 pm

74hc595 4 Digit 38mm C Driver ! 74hc595 serial connect C code please Digital clock.

PCM programmer

Joined: 06 Sep 2003
Posts: 21708

Posted: Mon Jan 04, 2010 2:46 pm

Quote:

74hc595 serial connect C code please

Do you think we are your code slaves, to produce code on demand ?
We are all volunteers, working in industry or elsewhere. We like
to answer questions, but not to be code slaves.

yakuzaistanbul

Joined: 04 Jan 2010
Posts: 2

Posted: Mon Jan 04, 2010 3:20 pm

sorry

I want students to develop amateur lcd temperature display with clock and I did. I wanted to get help with segment I wanted to. lcd with the code

Code:

#include "16f628a.h" //Mikrodenetleyici seçilir
#fuses INTRC_IO, NOWDT, PROTECT, PUT, NOMCLR //Sigortalar seçilir

#use delay (clock=4000000) //Osilatör hızı belirlenir

#use rs232(baud =4800, PARITY=N, xmit=PIN_A2, rcv=PIN_A1, BITS =8, ERRORS, STOP=2, STREAM = PORT1)
#use I2C(master, slow, RESTART_WDT, sda=PIN_A7, scl=PIN_A6)

#define LCD_EN PIN_B0
#define LCD_RS PIN_B1
#define LCD_RW PIN_B2

#define LCD_D4 PIN_B4
#define LCD_D5 PIN_B5
#define LCD_D6 PIN_B6
#define LCD_D7 PIN_B7

#define LINE_1 0x00
#define LINE_2 0x40
#define LCD_CLR_DISP 0X01 // Clear screen, home cursor, unshift display
#define LCD_RETURN_HOME 0X02 // Home cursor, unshift display
#define LCD_ENTRY_DEC 0X04 // Display shift off, dec cursor move dir
#define LCD_ENTRY_DEC_SHIFT 0x05 // Display shift on, dec cursor move dir
#define LCD_ENTRY_INC 0x06 // Display shift off, inc cursor move dir
#define LCD_ENTRY_INC_SHIFT 0x07 // Display shift on, inc cursor move dir
#define LCD_DISP_OFF 0x08 // Display off
#define LCD_DISP_ON 0x0C // Display on, cursor off
#define LCD_DISP_ON_BLINK 0x0D // Display on, cursor off, blink char
#define LCD_DISP_ON_CURSOR 0x0E // Display on, cursor on
#define LCD_DISP_ON_CURSOR_BLINK 0x0F // Display on, cursor on, blink char
#define LCD_MOVE_CURSOR_LEFT 0x10 // Move cursor left (decrement)
#define LCD_MOVE_CURSOR_RIGHT 0x14 // Move cursor right (increment)
#define LCD_MOVE_DISP_LEFT 0x18 // Shift display left
#define LCD_MOVE_DISP_RIGHT 0x1C // Shift display right
#define LCD_FUNCTION_4BIT_1LINE 0x20 // 4-bit interface, single line, 5x7 dots
#define LCD_FUNCTION_4BIT_2LINES 0x28 // 4-bit interface, dual line, 5x7 dots
#define LCD_FUNCTION_8BIT_1LINE 0x30 // 8-bit interface, single line, 5x7 dots
#define LCD_FUNCTION_8BIT_2LINES 0x38 // 8-bit interface, dual line, 5x7 dots
#define LCD_CGRAM_BASE_ADDR 0x40 // Set the CGRAM address
#define LCD_DDRAM_BASE_ADDR 0x80 // Set the DDRAM address
#define LCD_LINE_1 0x80 // Position of start of line 1
#define LCD_LINE_2 0xC0 // Position of start of line 2
#define LCD_LINE_3 0x94 // Position of start of line 3
#define LCD_LINE_4 0xD4 // Position of start of line 4
#define LCD_DEGREE_CHAR 0x00 // Ascii 00
#define LCD_TYPE 2 // 0=5x7, 1=5x10, 2=2 lines

void Ds1307Init(void);
void OkuDs1307(void);
void InitTmp100(void);
void OkuTmp100(void);

void LCD_Init(void);
void LCD_SetPosition(unsigned int);
void LCD_PutChar(unsigned int);
void LCD_PutCmd(Unsigned int);
void LCD_PulseEnable(void);
void LCDInit_PulseEnable(void);
void LCD_SetData(unsigned int);

int SicaklikTmp100Isaret=' ', SicaklikTmp100Basamak1, SicaklikTmp100Basamak2, SicaklikTmp100Basamak3;
int SicaklikDegeri;
int SayacRunLed1, SayacRunLed2;
int Saniye, Dakika, Saat, HaftaGun, Aygun, Ay, Yil;
int SaniyeAlt, SaniyeUst, DakikaAlt, DakikaUst, SaatAlt, SaatUst, HaftaGunAlt, HaftaGunUst;
int AygunAlt, AygunUst, AyAlt, AyUst, YilAlt, YilUst;
int BufferSaniye, SayacIkiNokta;

//#int_RTCC
//void Timer9KesmeGeldi(void){

// if(SayacRunLed1==0){

// OkuDs1307();
// OkuTmp100();
// }

// restart_wdt();
//}

void LCD_SetPosition(unsigned int cX){
LCD_SetData(swap(cX) | 0x08 );
LCD_PulseEnable();
LCD_SetData(swap(cX) );
LCD_PulseEnable();
}

void LCD_SetData(unsigned int cX){
output_bit(LCD_D4, cX & 0x01);
output_bit(LCD_D5, cX & 0x02);
output_bit(LCD_D6, cX & 0x04);
output_bit(LCD_D7, cX & 0x08);
}

void LCD_PulseEnable(void){
output_high(LCD_EN);
delay_us(10);
output_low(LCD_EN);
delay_ms(20);
}

void LCDInit_PulseEnable(void){
output_high(LCD_EN);
delay_us(10);
output_low(LCD_EN);
delay_ms(20);
}

void LCD_PutCmd(unsigned int cX){
LCD_SetData(swap (cX) ); /* send high nibble */
LCD_PulseEnable();
LCD_SetData(swap(cX) ); /* send low nibble */
LCD_PulseEnable();
}

void LCD_PutChar(unsigned int cX ){
output_high(LCD_RS);
LCD_SetData(swap(cX)); /* send high nibble */
LCD_PulseEnable();
LCD_SetData(swap(cX)); /* send low nibble */
LCD_PulseEnable();
output_low(LCD_RS);
}

void LCDInit(void){
LCD_SetData(0X00);
delay_ms(400); /* wait enough time after Vdd rise */
output_low(LCD_RS);
LCD_SetData(0X03); /* init with specific nibbles to start 4-bit mode */
LCDInit_PulseEnable();
LCDInit_PulseEnable();
LCDInit_PulseEnable();
LCD_SetData(0x02); /* set 4-bit interface */
LCDInit_PulseEnable(); /* send dual nibbles hereafter, MSN first */
LCD_PutCmd(0x2C); /* function set (all lines, 5x7 characters) */
LCD_PutCmd(0x0C); /* display ON, cursor off, no blink */
LCD_PutCmd(0x01); /* clear display */
LCD_PutCmd(0x06); /* entry mode set, increment & scroll left */
}

void OkuDs1307(void){
i2c_stop();
i2c_stop();
i2c_start();
i2c_write(0xD0);
i2c_write(0x00);

i2c_start();
i2c_write(0xD1);

Saniye =i2c_read(1);
Dakika =i2c_read(1);
Saat =i2c_read(1);
HaftaGun=i2c_read(1);
AyGun =i2c_read(1);
Ay =i2c_read(1);
Yil =i2c_read(0);
i2c_stop();

SaniyeAlt=(Saniye&0X0F) ;
SaniyeUst=((Saniye>>4)&0X07) ;
DakikaAlt=(Dakika&0X0F) ;
DakikaUst=((Dakika>>4)&0X07) ;
SaatAlt =(Saat&0X0F) ;
SaatUst =((Saat>>4)&0X07) ;
AyGunAlt =(AyGun&0X0F) ;
AyGunUst =((AyGun>>4)&0X07) ;
AyAlt =(Ay&0X0F) ;
AyUst =((Ay>>4)&0X07) ;
YilAlt =(Yil&0X0F) ;
YilUst =((Yil>>4)&0X07) ;

if(Saniye != BufferSaniye){
SayacIkiNokta=250;
BufferSaniye=Saniye;
}
}

void Ds1307Init(void){ //Start biti ve konfigürasyon Çalışıyor
int Durum;
i2c_stop();
i2c_stop();

i2c_start();
i2c_write(0xD0);
i2c_write(0x00);

i2c_start();
i2c_write(0xD1);
Durum = i2c_read(0);
i2c_stop();

Durum &= 0x7F;

i2c_start();
i2c_write(0xD0);
i2c_write(0x00);
i2c_write(Durum);

i2c_start();
i2c_write(0xD0);
i2c_write(0x07);
i2c_write(0x92);
i2c_stop();

i2c_start();
i2c_write(0xD1);
Durum = i2c_read(0);
i2c_stop();
}

void OkuTmp100(void){
int DegerAlt, DegerUst, Temp;

i2c_stop();
i2c_stop();

i2c_start();
i2c_write(0X90);
i2c_write(0X00);

i2c_start();
i2c_write(0X91);
DegerUst = i2c_read(1);
DegerAlt = swap(i2c_read(0));
i2c_stop();

if(bit_test(DegerAlt, 7) == 1){
SicaklikTmp100Isaret = ' ';

i2c_stop();
i2c_stop();
i2c_start();
i2c_write(0X90);
i2c_write(0X01);
i2c_write(0X60);

i2c_stop();
}
else{
if(bit_test(DegerUst, 7) == 0){
SicaklikTmp100Isaret = '+';

if(DegerUst<100){
SicaklikTmp100Basamak3 = 0;
SicaklikTmp100Basamak2 = DegerUst/10;
SicaklikTmp100Basamak1 = DegerUst%10;
}
else{
SicaklikTmp100Basamak3 = 1;
SicaklikTmp100Basamak2 = (DegerUst-100)/10;
SicaklikTmp100Basamak1 = DegerUst%10;
}
}

else{
SicaklikTmp100Isaret = '-';
bit_clear(DegerUst, 7);
Temp = 127-DegerUst;

SicaklikTmp100Basamak3 = 0;
SicaklikTmp100Basamak2 = DegerUst/10;
SicaklikTmp100Basamak1 = DegerUst%10;
}

SicaklikDegeri= SicaklikTmp100Basamak3*100+SicaklikTmp100Basamak2*10+SicaklikTmp100Basamak1-1;
}
}

void main (void){
set_tris_a(0Xff); // a port giriş giriş olarak yönlendiriliyor
set_tris_b(0X00); // b port çıkış
LcdInit();
Ds1307Init();
// fprintf(PORT1,"Start",);

LCD_SetPosition (LINE_1 + 0);
printf (LCD_PutChar, " Fatih ");
LCD_SetPosition (LINE_2 + 0);
printf (LCD_PutChar, " Ortam Sicakligi ");
delay_ms(1000);

// enable_interrupts(INT_RTCC);
// enable_interrupts (GLOBAL);

while(true){

OkuTmp100();
OkuDs1307();

// fprintf(PORT1,"%d - \x0D\X0A ", SicaklikDegeri);

LCD_SetPosition (LINE_1 + 0);
printf(LCD_PutChar,"%c %d %d%d: %d%d: %d%d ", SicaklikTmp100Isaret, SicaklikDegeri,
SaatUst,SaatAlt, DakikaUst,DakikaAlt, SaniyeUst,SaniyeAlt,);
delay_ms(50);

if(input(PIN_A5)==1){

if(++DakikaAlt>9){
DakikaAlt=0;
if(++DakikaUst>5){
DakikaUst=0; }
}
Dakika = ((DakikaUst<<4) | DakikaAlt);
I2C_Start();
I2C_Write(0xD0);
I2C_Write(0x01);
I2C_Write(Dakika);
I2C_Stop();

}
}
}

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum