CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
PIC18F6722 development board

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
M0KHZ



Joined: 14 Feb 2008
Posts: 18
Location: Cumbria

View user's profile Send private message

PIC18F6722 development board
PostPosted: Sun Dec 14, 2008 5:05 am     Reply with quote
Thought this might be of interest, I’ve just finished creating a dev board for a PIC18F6722. Here are the specs:

ICD / ICSP interface
EEPROM 2x 512
2 x RS232
Header for graphic LCD ( T6963T – TechToys driver pin out)
Negative supply for contrast (if required)
4 x push button switches
4 x LED
Encoder interface
Remaining I/O pins to headers, including I2C bus.

Schematic can be found here: http://www.m0khz.com/?p=573

Gerbers can be found here. http://www.m0khz.com/?p=576

Kevin – M0KHZ
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group