CCS :: View topic - CCS TCP/IP Stack

CCS C Software and Maintenance Offers

FAQ

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

CCS TCP/IP Stack

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

sohailkhanonline

Joined: 06 Mar 2008
Posts: 35
Location: pakistan

CCS TCP/IP Stack
Posted: Tue Apr 15, 2008 3:52 am

hi i am using ccs tcp/ip stack but i dont use development boards like PICNET I use Easypic 5 development board with 18F4620 and enc28j60 i made all the adjustments regarding pin outs and set the ip and mac address but none of the example is proving successfull. Can anybody help me Thanks _________________ sohail khan

KATHIR
Guest

Re: CCS TCP/IP Stack

Posted: Tue Apr 22, 2008 9:06 am

Reply with quote

sohailkhanonline wrote:

hi i am using ccs tcp/ip stack but i dont use development boards like PICNET I use Easypic 5 development board
with 18F4620 and enc28j60
i made all the adjustments regarding pin outs and set the ip and mac address but none of the example is proving successfull.

Can anybody help me Exclamation

Exclamation

Thanks

YOU GIVE YOUR SCHEMATIC .i GIVE MODIFICATIONS.i HAVE PORTED CCS TCP/IP STACK SUCCESFFULY GEORGE PIC10T BOARD USING 3.75 STACK

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group