CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
DS1307

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Haytham
Guest
DS1307
PostPosted: Mon Jul 23, 2007 5:53 am     Reply with quote
Dear All,
I want to use ds1307 RTC with PIC16F877A microcontroller.
I found the follwoing library:
Code:
#define DS1307_SDA  PIN_B1
#define DS1307_SCL  PIN_B0
#use i2c(master, sda=DS1307_SDA, scl=DS1307_SCL)

//==========================
// initial DS1307
//==========================
void init_DS1307()
{
   output_float(DS1307_SCL);
   output_float(DS1307_SDA);
}
//==========================
// write data one byte to
// DS1307
//==========================
void write_DS1307(byte address, BYTE data)
{
   short int status;
   i2c_start();
   i2c_write(0xd0);
   i2c_write(address);
   i2c_write(data);
   i2c_stop();
   i2c_start();
   status=i2c_write(0xd0);
   while(status==1)
   {
      i2c_start();
      status=i2c_write(0xd0);
   }
}
//==========================
// read data one byte from DS1307
//==========================
BYTE read_DS1307(byte address)
{
   BYTE data;
   i2c_start();
   i2c_write(0xd0);
   i2c_write(address);
   i2c_start();
   i2c_write(0xd1);
   data=i2c_read(0);
   i2c_stop();
   return(data);
}


But, I need to use pin RB0 as external interrupt.
I dont know how to modify this library such that it uses another pin instead of B0.

Can any body help me in modifying this library?
Thanl you


Please send me at email if you can:
[email protected]

[/code]
treitmey



Joined: 23 Jan 2004
Posts: 1094
Location: Appleton,WI USA

View user's profile Send private message Visit poster's website

PostPosted: Mon Jul 23, 2007 8:13 am     Reply with quote
It seems like you would just change
#define DS1307_SDA PIN_B1
#define DS1307_SCL PIN_B0
to use the pins of your circuit.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group