CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
How to create own Characters in 5x8 LCD

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Richi-d
Guest
How to create own Characters in 5x8 LCD
PostPosted: Wed Mar 28, 2007 1:56 pm     Reply with quote
Hi all,
my Dot Matrix Display from Everbouquet works fine but how do I create own characters and how do I display them?

Thanks
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Wed Mar 28, 2007 2:21 pm     Reply with quote
You didn't give the part number. Is this a standard 16x2 LCD
character module ?

If so, do a web search for this string: custom LCD characters
You'll find websites that have tutorials about it:
http://www.geocities.com/dinceraydin/lcd/custom.htm
http://www.serialwombat.com/parts/lcd107.htm

There are also posts in the forum archives that explain how to
load the custom character data into the LCD, and then display it.
http://www.ccsinfo.com/forum/viewtopic.php?t=25743&highlight=custom+lcd+characters
Richi-d
Guest
PostPosted: Wed Mar 28, 2007 2:32 pm     Reply with quote
This is a small 5x8, 2x8 lines modul
PartNo is MC0802A-SGR

I will look to the info you gave me
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group