USB Driver

deniska_gus · Joined: 11 Jul 2006 Posts: 42 Location: Minden, Germany

Hi all,

i've got just one question. Where can i get an USB-Driver for PIC18Fxxx? Or should i write it by myself? How do you make it?

Regards. Dennis

Ttemah · Guest

A USB driver to do _what_?.
There are examples of implementing a CDC device, block IO device, keyboard/mouse device etc., all with their required drivers, in the 'examples' directory for the compiler...

Best Wishes

deniska_gus · Joined: 11 Jul 2006 Posts: 42 Location: Minden, Germany

i am using PIC16 to comunicate with pc over rs232. Now i would make it over USB. But i don't know how i can do it, becouse i have not USB driver for this.

rberek · Joined: 10 Jan 2005 Posts: 207 Location: Ottawa, Canada

Then look at the CDC driver that Ttelmah referred to...

r.b.

meereck · Joined: 09 Nov 2006 Posts: 173

If you are going to use the CDC firmware use PICC\Drivers\cdc_NTXP.inf as a PC driver for that device.
If you want to implement your own device with custom endpoints, you should use mchpusb.inf as a driver and import mpusbapi.dll into your PC end application.