CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Device could not be started - Serial/USB example

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
PeterDove



Joined: 06 Jan 2007
Posts: 12

View user's profile Send private message

Device could not be started - Serial/USB example
PostPosted: Fri Jan 19, 2007 9:58 am     Reply with quote
Hi All,

I am compiling the serial/USB example and I have now managed to get it uploaded to the PIC and also my USB circuit is working as when I plug it into the USB port of my PC the PC installs a new comms port. However there appears to be a problem with the comm port and it states that the device could not be started.

Is there anything else that I need to make this example work? Have I forgotten some driver file or some such? I havent used any... Windows just recongnised it as a comms port.

Any help would be appreciated, as a newbie I have gone through hell to make the programmer for the chip, get the chip programmed, to make a working USB circuit and get some response from the PC... If I could just make that last step I would be able to make huge leaps from there!

Thank you

Peter
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group