CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
"Could not run program: The COM buffer is too small&quo

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
mkr



Joined: 08 Aug 2006
Posts: 49

View user's profile Send private message

"Could not run program: The COM buffer is too small&quo
PostPosted: Tue Aug 15, 2006 2:25 pm     Reply with quote
Hello All,
I am facing this unique issue such as "Could not run program: The COM buffer is too small" when using the CCS compiler. I have setup the hardware with the ICD-S40 as one COM port of PC. I am using another COM port to transmit data(like a hyper terminal app.) to my hardware. When I ever I do an in circuit debug, I have the above message from the compiler. Hence my debugging takes longer time to figure out issues. I am using CCS compiler (ver.PCH 3.241 and IDE ver 3.212).

Is there anyother way to avoid this message.
_________________
Thanks

mkr
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group