CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
PIC18LF6680 3.3V ECAN performance

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
alexz



Joined: 17 Sep 2004
Posts: 133
Location: UK

View user's profile Send private message

PIC18LF6680 3.3V ECAN performance
PostPosted: Thu Jun 08, 2006 3:10 am     Reply with quote
Can the PIC18LF6680 achieve 1M Baud CAN rate when supplyed from 3.3V? Oscillator 20MHz
Has anybody got working CAN using a 3.3V PIC ?

I have got my software configured for 1Mbps and it works fine with the PIC18F4680 when supplied from 5V, but not with the PIC18LF6680 which is supplied from 3.3V ( the same code configurations), where I can achieve maximum of 125K baud. If I configure the device to a higher baud rate, the data gets crazy and the baud rate becomes unstable and upto 80Kbps.

Is there a problem with this particular PIC family or with 3.3V supply?
Accordingly to the data sheet the maximum clock frequency I can have is 25MHz when supplied from 3.3V, but I am using just 20MHz.
_________________
Alex
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group