CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
How to avoid Code, Table Write and Table Read Protect ???

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
moutinho



Joined: 12 May 2005
Posts: 31
Location: BRAZIL

View user's profile Send private message Visit poster's website MSN Messenger

How to avoid Code, Table Write and Table Read Protect ???
PostPosted: Fri Oct 21, 2005 12:47 pm     Reply with quote
Hi,

I am developing using using MPLAB ICD2 and PIC18F8520. But I get the following message after downloading the software:

MPLAB ICD 2 Ready
Programming Target...
ICDWarn0042: Protect bit (CP_4 : Code Protect 10000-13FFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (CP_5 : Code Protect 14000-17FFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (CP_6 : Code Protect 18000-1BFFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (CP_7 : Code Protect 1C000-1FFFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (WRT_4 : Table Write Protect 10000-13FFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (WRT_5 : Table Write Protect 14000-17FFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (WRT_6 : Table Write Protect 18000-1BFFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (WRT_7 : Table Write Protect 1C000-1FFFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (EBTR_4 : Table Read Protect 10000-13FFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (EBTR_5 : Table Read Protect 14000-17FFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (EBTR_6 : Table Read Protect 18000-1BFFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
ICDWarn0042: Protect bit (EBTR_7 : Table Read Protect 1C000-1FFFF) is enabled. MPLAB ICD 2 will not enter debug mode in this configuration. Do you wish to disable this setting?
...Erasing Part


How can I solve this?

Thanks,
Andre
PCM programmer



Joined: 06 Sep 2003
Posts: 21708

View user's profile Send private message

PostPosted: Fri Oct 21, 2005 1:22 pm     Reply with quote
This is a pure ICD2 question, so you should ask it on the Microchip ICD2
forum. But first, use their search engine. Go to this link:
http://forum.microchip.com/search.asp
Set it for this:

Search Term: ICDWarn0042
Time Filter: All Topics

You will get about 10 hits on the topic.
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group