CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
Getting a PWM output on more than one pin in 16f628 mcu

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
arunb



Joined: 08 Sep 2003
Posts: 492
Location: India

View user's profile Send private message Send e-mail

Getting a PWM output on more than one pin in 16f628 mcu
PostPosted: Thu Mar 17, 2005 3:28 am     Reply with quote
Hi,

MCU : 16F628
C Compiler: PCM ver 3.1

Is it possibl to get more than one pwm output on the 16F628 mcu ?? If so kindly advise how I can do this, also is it possible to set the pwm frequency to different rates on each of the pins. ( so that each pin has a different frequency) ??

thanks
arunb
bluetooth



Joined: 08 Jan 2005
Posts: 74

View user's profile Send private message

PostPosted: Thu Mar 17, 2005 6:33 am     Reply with quote
The 628 has one hardware PWM output (RB3) - additional PWMs would have to be done in software, or you could multiplex. Or you could upgrade the processor to one that has more hardware....

Good luck...
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group