CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
ICD-S debug errors

 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
Tim Rainer



Joined: 23 Feb 2004
Posts: 1

View user's profile Send private message

ICD-S debug errors
PostPosted: Mon Feb 23, 2004 12:48 pm     Reply with quote
Can anyone Help???

I am using the CCS c compiler with the ICD-S module.

I can't seem to download and debug on my hardware, which was previously working.

I get error various errors:

Verify Memory fail : 0
Verify Memory fail : 2004

sometimes I get an error that says the debugger may not be installed.

I can download and debug on the CCS prototype board.

Any help????
Guest
PostPosted: Mon Mar 01, 2004 8:13 am     Reply with quote
I thought I would answer my own question in the event that it might help someone else with similar problems.....

I am using a switching power supply that was mounted just under the pcb with the target processor. Electromagnet interference from the power supply caused the communication/operation problems I experienced with the debugger. Phyically moving the power supply some distance away from the pcb solved the problem and everything seems to run fine now...

Maybe this will help someone else....
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group