CCS :: View topic - BCD to byte and back

CCS C Software and Maintenance Offers

FAQ

Official CCS Support

Profile Log in to check your private messages Log in

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support

BCD to byte and back

CCS Forum Index -> General CCS C Discussion

View previous topic :: View next topic

Author

Message

picker

Joined: 07 Sep 2003
Posts: 19
Location: South Africa

BCD to byte and back
Posted: Mon Jan 05, 2004 2:34 am

I need to increment a BCD value. My thoughts were to convert the BCD to a byte add 1 and then convert back to BCD. Does anyone have any code that converts BCD to Byte and back? Thanks Kevin

PCM programmer

Joined: 06 Sep 2003
Posts: 21708

Posted: Mon Jan 05, 2004 2:54 am

Reply with quote

Quote:

I need to increment a BCD value. My thoughts were to convert
the BCD to a byte add 1 and then convert back to BCD. Does
anyone have any code that converts BCD to Byte and back?

I think you could write code to do it without converting back
and forth to binary, but to answer your question:

There is code in the archives to do this. Do a search for bin2bcd
and you'll find that routine and its mate, bcd2bin.

Ttelmah
Guest

Re: BCD to byte and back

Posted: Mon Jan 05, 2004 5:21 am

Reply with quote

picker wrote:

I need to increment a BCD value. My thoughts were to convert the BCD to a byte add 1 and then convert back to BCD. Does anyone have any code that converts BCD to Byte and back?

Thanks
Kevin

More work than is needed. :-)

int8 BCDval

if ((++BCDval & 0xF)==0xA) BCDval+=5;

A lot less work than performing the two conversions.

Best Wishes

picker

Joined: 07 Sep 2003
Posts: 19
Location: South Africa

BCD to Byte and back
Posted: Mon Jan 05, 2004 6:06 am

Thanks guys...

KerryW
Guest

BCD math
Posted: Mon Jan 05, 2004 9:03 am

int8 BCDval if ((++BCDval & 0xF)==0xA) BCDval+=5; Shouldn't that be if ((++BCDval & 0xF)==0xA) BCDval+=6; ?

Ttelmah
Guest

Re: BCD math

Posted: Mon Jan 05, 2004 4:38 pm

Reply with quote

KerryW wrote:

int8 BCDval

if ((++BCDval & 0xF)==0xA) BCDval+=5;

Shouldn't that be
if ((++BCDval & 0xF)==0xA) BCDval+=6; ?

Yes...
Sorry, a 'mistype'.

Display posts from previous:

	CCS Forum Index -> General CCS C Discussion	All times are GMT - 6 Hours
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group